Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS301163
Mevotech Supreme CMS801051 front left lower control arm with ball joint for the 2009-2013 Subaru Forester and other vehicles links the left front wheel to the chassis. As a control arm and ball joint assembly, it lets the wheel move with the road and pivot when you steer.
A clunk over bumps, loose steering or a split dust boot can mean the arm, bushings or ball joint are worn, though other suspension parts can cause similar signs. With the engine off, look for cracked bushings, a torn boot or a bent arm before ordering. Replace the front lower arms as a pair when you can; this listing is one arm for the front left, and the right side is a separate part.
It is a lower control arm for the 2009-2013 Subaru Forester, the 2011-2014 Subaru Impreza and the 2013-2014 Subaru WRX. The 2009-2013 Subaru Forester takes one on the front left. Its stamped steel construction meets or exceeds OE specifications.
Fit and size
Build and materials
One front left lower control arm with ball joint, rubber bushings and a dust boot.
Interchange: 2703-512090 · 524-783
19357127 · TC7364 · CB72163 · CB72163PR · CA5427 · RK622787 · 2607795 · 30031284 · 20202SC010 · 20202SC011 · 20202SC012 · 20202SC013 · X47CJ0186 · CP5208
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this control arm right for the 2009-2013 Subaru Forester?
Yes. Mevotech Supreme CMS801051 is the front left lower control arm with ball joint for the 2009-2013 Subaru Forester. The right side takes its own separate arm.
Does it include control arm bushings for the 2009-2013 Subaru Forester?
Yes. The rubber bushings, rubber dust boot and ball joint come with the arm, along with the castle nut and cotter pin for the ball joint stud.
What is this front left lower control arm made of?
Mevotech Supreme CMS801051 has stamped steel construction with a protective surface treatment against rust. The bushings and the dust boot are rubber.
How can I tell if a lower control arm or ball joint is worn?
With the engine off, look for a torn dust boot, cracked bushings or a bent arm, and notice a clunk over bumps or loose steering. A shop can test ball joint play safely.
How does the ball joint on this arm attach to the vehicle?
It is secured with the part-specific castle nut and cotter pin provided. The ball joint has a threaded stud and a press-in mounting type.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.