Mevotech Supreme CMS86136 front left lower control arm with ball joint for the 2007-2021 Toyota Tundra and other vehicles connects the front left wheel to the chassis through a ball joint and bushings. The Mevotech Supreme control arm is a control arm and ball joint assembly, so the ball joint comes with the arm.
- Mevotech Supreme line, engineered in-house with application-specific upgrades for durability and performance
- Sintered metal bearings for longer-lasting performance
- Stamped steel construction with rubber bushings
- Protective surface treatment that resists rust build-up
- Pre-greased, greaseable ball joint that is simple to service
Quick facts
- Part: Mevotech Supreme CMS86136 control arm with ball joint
- Also called: control arm and ball joint assembly
- Fits: 2007-2021 Toyota Tundra and other vehicles
- Position: Front left lower
- Material: Steel control arm, rubber bushings
- Condition: New
A worn arm, bushing or ball joint can show up as a clunk over bumps, loose-feeling steering or uneven tire wear. Before replacing it, find the cause: with the engine off, look over the arm and its bushings for cracks, tears or rust, and leave ball joint play checks to a shop.
Fits
This lower control arm for the 2007-2021 Toyota Tundra also fits the 2008-2022 Toyota Sequoia.
Specifications
Fit and size
- Position: Front left lower
- Quantity for the front left position: 1
- Maximum width: 19.5 in
- Maximum length: 20.5 in
- Ball joint mounting type: Press in
- Ball joint stud type: Threaded
Build and materials
- Control arm material: Steel
- Bushing material: Rubber
- Bearing material: Sintered metal
- Pre-greased and greaseable: Yes
- Condition: New
- Country of origin: Malaysia
In the box
One control arm with ball joint, bushings, a part-specific castle nut and a 180 degree SAE grease fitting. The front left takes one; the front right is its own part and is ordered separately, and both sides are normally replaced together.
Installation notes
- Secure the ball joint to the vehicle with the part-specific castle nut provided.
- Labor Saver™ designs, tools and hardware are meant to make installation faster.
Interchange: 820-287911B · 622.44021 · 521-393
19291923 · VGS86136 · CB74363 · CB74363PR · CA16329 · RK621304 · GS86136 · 2606133 · 2606133M · 163168 · 30031023 · 5071682 · X50CJ7141 · JTC2531 · 4806909090 · 480690C020 · TK621304
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
19291923, VGS86136, 820-287911B, 622.44021, 521-393, CB74363, CB74363PR, CA16329, RK621304, GS86136, CMS86136, 2606133, 2606133M, 163168, 30031023, 5071682, X50CJ7141, JTC2531, 4806909090, 480690C020, TK621304
Frequently Asked Questions
Is this control arm for the 2007-2021 Toyota Tundra a left or right side part?
This Mevotech Supreme CMS86136 is the front left lower arm; the front right side is a separate part. It fits the 2007-2021 Toyota Tundra.
Does the CMS86136 control arm come with a castle nut and grease fitting?
Yes. The Mevotech Supreme CMS86136 comes with the ball joint, bushings, a part-specific castle nut and a 180 degree SAE grease fitting, and mounting hardware is included.
What is the Mevotech Supreme suspension control arm made of?
This control arm has stamped steel construction with rubber bushings and a sintered metal bearing. A protective surface treatment helps resist rust.
Can the ball joint on this control arm be greased?
Yes. The ball joint is pre-greased and greaseable, and a 180 degree SAE grease fitting is included for servicing.
Does this lower control arm also fit the 2008-2022 Toyota Sequoia?
Yes. The Mevotech Supreme CMS86136 fits the 2008-2022 Toyota Sequoia in the front left lower position.
