Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS501143
Mevotech Supreme CMS50114 front right lower control arm with ball joint for the 2000-2005 Buick LeSabre and other vehicles connects the wheel to the frame. This Mevotech Supreme suspension control arm comes as a control arm and ball joint assembly, so the ball joint pivot and bushings are included.
A clunk over bumps, uneven tire wear or steering that wanders can mean a worn control arm or ball joint. Before you replace this arm, rule out loose tie rods, a worn strut or an alignment issue, which can produce similar symptoms.
The 2000-2005 Buick LeSabre, the 1998-2005 Buick Park Avenue and the 1997-2005 Cadillac DeVille take this arm, and so do many other vehicles. If your car is not named here, find its year and model in the "Vehicles it fits" section. This listing is one front right arm; the front left is a separate part, normally replaced at the same time.
Fit and size
Build and materials
One front right lower control arm with ball joint, rubber bushings, a neoprene dust boot, a castle nut, a cotter pin and a 180 degree SAE grease fitting. The front right side takes one.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this the right Buick LeSabre control arm for a 2000-2005 model?
Yes. Mevotech Supreme CMS50114 is the front right lower control arm with ball joint for the 2000-2005 Buick LeSabre. The left side is a separate part.
Is this a Buick Park Avenue control arm for model years 1998-2005?
Yes. This front right lower arm fits the 1998-2005 Buick Park Avenue. The front left arm is ordered separately.
Does the Mevotech Supreme lower control arm come with bushings and a ball joint?
Yes. Mevotech Supreme CMS50114 includes the ball joint, rubber bushings, a neoprene dust boot and a 180 degree SAE grease fitting. Mounting hardware is included too.
What is the bearing material in this control arm?
The bearing material is sintered metal. The control arm is aluminum, the bushings are rubber and the dust boot is neoprene.
What holds the ball joint stud on this control arm?
The part-specific castle nut and cotter pin provided with the arm secure the ball joint to the vehicle.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.