Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS401218
Mevotech Supreme CMS901038 front right lower control arm with ball joint for the 2006-2012 Kia Sedona and other vehicles links the wheel to the chassis. It includes the ball joint, rubber bushings and a neoprene dust boot.
A worn ball joint or bushing can show up as a clunk over bumps, uneven tire wear or loose steering feel. A worn sway bar link, strut mount or tie rod end can be behind these signs too, so find the cause before buying. If a worn control arm and ball joint assembly is the cause, this one replaces it.
It is a direct-fit replacement for the 2006-2012 and 2014 Kia Sedona and the 2007-2010 Hyundai Entourage. On the 2006-2012 Kia Sedona, this listing is the one front right lower arm; the front left is a separate part ordered separately, and both sides are normally replaced together.
Fit and size
Build and materials
One control arm with ball joint, bushings, dust boot, a 180 degree SAE grease fitting, and an application-specific pinch bolt and locking nut.
Interchange: 101-6111 · 102-6111 · 622.50829 · 521-736
19337684 · TC5753 · CB63234 · CB63234PR · CA16348 · 545014D101 · 545014D100 · 545014D102 · RK622266 · 30030317 · X23CA7455 · X23CJ7030 · TK622266
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a 2006-2012 Kia Sedona control arm for the front right side?
Yes. Mevotech Supreme CMS901038 is a front right lower control arm with ball joint for the 2006-2012 Kia Sedona. The front left side is a separate part.
What comes with this Mevotech Supreme lower control arm?
Mevotech Supreme CMS901038 includes the ball joint, rubber bushings, neoprene dust boot, a 180 degree SAE grease fitting and an application-specific pinch bolt and locking nut.
Is the Mevotech Supreme control arm made of steel?
Yes. The arm is steel with stamped steel construction and a protective surface treatment. The bushings are rubber and the bearing material is sintered metal.
What are signs a Mevotech Supreme suspension control arm ball joint is worn?
A clunk over bumps, uneven tire wear or loose steering can mean the joint is worn. With the engine off, a torn dust boot or cracked rubber bushings are visible signs; a shop can test the rest.
Can I grease the ball joint on this control arm?
Yes. The ball joint is pre-greased and greaseable, and a 180 degree SAE grease fitting is included for servicing.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.