Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS861195
Mevotech Supreme CMS901278 front left lower control arm with ball joint for the 2019-2020 Hyundai Santa Fe joins the wheel to the vehicle and pivots as the suspension moves. Also known as a control arm and ball joint assembly, the Mevotech Supreme control arm includes the ball joint, bushings and dust boot.
A clunk over bumps, uneven front tire wear or loose steering can come from a worn arm, bushing or ball joint. Before replacing, look with the engine off for a torn dust boot, grease seeping out or split rubber bushings, since other suspension parts can make similar noises.
This is a direct-fit replacement control arm for the 2019-2020 Hyundai Santa Fe, and the front left takes one. Front lower arms are normally changed as a pair, and this listing is one: the front left. The front right is ordered separately.
Fit and size
Build and materials
One control arm with ball joint, bushings, dust boot, 90 degree SAE grease fitting, application-specific pinch bolt and locking nut.
Interchange: 19474565 · CB63353 · 54500S1050 · 5CB90480 · RK623804 · GS901278 · 2608966
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the lower control arm for the 2019-2020 Hyundai Santa Fe on the front left?
Yes. Mevotech Supreme CMS901278 is the front left lower control arm for the 2019-2020 Hyundai Santa Fe. The front right takes a separate part.
What is in the box with this Mevotech Supreme suspension control arm?
Mevotech Supreme CMS901278 comes with its ball joint, bushings, dust boot, a 90 degree SAE grease fitting, an application-specific pinch bolt and a locking nut.
Is this control arm pre-greased?
Yes. This control arm assembly is pre-greased and greaseable, and the 90 degree SAE grease fitting is included for later servicing.
How do I know if a front lower control arm with a ball joint is wearing out?
A clunk over bumps, uneven front tire wear or loose steering can point to a worn arm, bushing or ball joint. A shop can test the ball joint for play.
What is the dust boot on this control arm made of?
The dust boot is neoprene. Mevotech Supreme CMS901278 also has a sintered metal bearing and rubber bushings.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.