Dorman - OE Solutions Suspension Control Arm P/N:521-123
Dorman 521-490 rear right upper control arm for the 2007-2014 Mercedes-Benz CL550 and other vehicles holds the rear wheel in position while the suspension moves. This Dorman control arm is precision-engineered to match the design and dimensions of the original components.
Clunking over bumps, uneven rear tire wear or loose handling can mean this suspension control arm or its bushings are worn, though a worn shock absorber or rear wheel bearing can produce similar signs. This listing is one arm for the rear right upper position; one sits on each side of the axle, the rear left is its own part ordered separately, and the two sides are normally replaced together.
This rear right upper control arm is a direct replacement for the 2007-2014 Mercedes-Benz CL550, the 2007-2013 Mercedes-Benz CL500 and the 2012-2013 Mercedes-Benz S350. If your Mercedes-Benz is not one of those, find its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with its bushings. Mounting hardware, a ball joint and a grease fitting are not included, and the old fasteners may not be reusable, so plan on new bolts.
Interchange: 102-6805
TC2479 · CA4951 · 2CB10244 · RK641708 · 2213500606 · 2223500232 · CMS101094 · 2606449 · JTC1352
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Dorman 521-490 control arm fit the 2007-2014 Mercedes-Benz CL550?
Yes. Dorman 521-490 is the rear right upper control arm for the 2007-2014 Mercedes-Benz CL550. For another car, look up its year and model in the "Vehicles it fits" section.
Do bushings come with this rear right upper control arm?
Yes, the bushings are included with the arm. Mounting hardware, a ball joint and a grease fitting are not included, so plan on new bolts.
What is the Dorman 521-490 control arm made of?
Dorman 521-490 has an aluminum arm with casting/forged construction and a powder-coated finish. Its bushings are rubber.
What are the bushing sizes on this rear right upper control arm?
The bushing has a 14.3 mm inside diameter, a 39.6 mm outside diameter and a 92 mm length. The distance between the mounting holes is 322 mm.
Does Dorman 521-490 interchange with part number 102-6805?
Yes, 102-6805 is one of the numbers Dorman 521-490 replaces. The other numbers it replaces are on the Interchange line at the bottom of the description.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.