Delphi Suspension Stabilizer Bar Link Kit P/N:TC2045
$18.99
(You save)
The Delphi Suspension Stabilizer Bar Link Kit (TC2045) ties the stabilizer bar to the suspension, transferring load between the two so the bar can resist body roll through corners. It's a direct-fit replacement for the 1989-1998 Nissan 240SX, 2000-2003 Volvo S40 and 2000-2004 Volvo V40 — Delphi lists this kit for both front and rear stabilizer bar positions across the covered applications (see the Buyer's Guide tab to confirm the location and engine on your vehicle).
OE-derived validation: Built on Delphi's OE steering expertise and tested to extremes — operating below -40°C and above 120°C, plus 720 hours of salt-spray exposure — with dimensional and material analysis matching the aftermarket part to the OE.
Fatigue tested: Each link is fatigue tested to help avoid failure.
Ultrasonic molding: Manufactured with ultrasonic molding to help prevent future weld breakage.
Micron tolerances: Machined to micron tolerances for durability and smooth joint operation.
Anti-corrosion protection: Applied to each part for corrosion prevention and improved appearance.
Worn links often announce themselves with clunking or rattling over bumps and vague, loose handling in turns; if a failed link is behind those symptoms, this stabilizer bar link kit replaces it.
It connects the stabilizer bar to the suspension, transferring load so the bar can resist body roll during cornering.
Which vehicles does this kit fit?
It's a direct-fit replacement for the 1989-1998 Nissan 240SX, 2000-2003 Volvo S40 and 2000-2004 Volvo V40. Check the Buyer's Guide tab to confirm your vehicle.
Is this the same as a stabilizer bar link kit?
Yes — sway bar link kit and stabilizer bar link kit are two names for the same part, and Delphi TC2045 is that link kit.
Does it fit the front or rear?
Delphi lists this kit for both front and rear stabilizer bar positions across the covered vehicles. See the Buyer's Guide tab for the correct location on yours.
What are the signs a sway bar link needs replacing?
Clunking or rattling over bumps and loose, vague handling in turns are common signs. Replacing the links in pairs on the same axle helps keep handling balanced.
Write a Review
Delphi
Delphi Suspension Stabilizer Bar Link Kit P/N:TC2045
Keep body roll in check and your suspension responding predictably with the Delphi Suspension Stabilizer Bar Link Kit TC1799. This rear right sway bar link ties the stabilizer bar to the suspension...
Keep your stabilizer bar working with the body and cut down on front-end rattles with the Delphi Suspension Stabilizer Bar Link Kit TC1929, cataloged for the FRONT LEFT position on the 2009 Land...
Keep the front stabilizer bar tied to the suspension and clatter-free with the Delphi Suspension Stabilizer Bar Link Kit TC2059. This front sway bar link kit connects the front stabilizer bar to the...
Keep your sway bar tied to the suspension and tame body roll through the corners with the Delphi Suspension Stabilizer Bar Link Kit TC1513. This FRONT stabilizer bar link kit connects the front sway...
Keep your Saab's front sway bar working with the suspension it's supposed to control — the Delphi Suspension Stabilizer Bar Link Kit (MPN TC2085) is a direct-fit front replacement for the 2003-2011...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
