Monroe Shocks & Struts Suspension Strut and Coil Spring Assembly P/N:153031
Monroe 172607 front left strut assembly for the 2009-2010 Nissan Murano combines the strut, coil spring and upper mount in one preassembled unit. It is a Monroe Quick-Strut, also called a complete strut and coil spring assembly.
Bouncing or nosediving after bumps, fluid on the strut body, a clunk over rough pavement or uneven tire wear can mean a strut is worn. Worn tie rods, ball joints, sway bar links or wheel bearings can be behind some of these signs too, so find the cause before buying.
This Monroe quick strut assembly fits the 2009-2010 Nissan Murano, which takes one in the front left position. This listing is that one piece; the front right is a separate part, and both sides are normally replaced together.
Fit and size
Build and materials
One strut assembly with its coil spring, upper strut mount, and strut mount and coil spring insulators. Mounting hardware is not included, so plan on new mounting hardware because the old pieces may not be reusable.
Interchange: LS5494671L · 34NS1132
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Monroe strut assembly the right one for the 2009-2010 Nissan Murano?
Yes. Monroe 172607 is the front left strut assembly for the 2009-2010 Nissan Murano. The front right takes a separate part.
What does the Monroe suspension strut and coil spring assembly include?
This front left unit includes the coil spring, upper strut mount, and strut mount and coil spring insulators. Mounting hardware is not included.
Is the Monroe complete strut assembly gas charged?
Yes. Monroe 172607 is gas charged. It is a passive suspension unit, with no adjustable compression and no adjustable ride height.
How can I spot a worn front strut without lifting the car?
With the engine off and the car cool, look for fluid on the strut body or a cracked coil spring. In normal driving, watch for bouncing after bumps or a clunk over rough pavement.
Do I need a spring compressor to install this Quick-Strut?
No. The spring, strut and upper mount come preassembled as one unit, so no spring compressor is needed.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.