TERREPOWER 3631 starter for the 1981 Chevrolet Impala V6 3.8L and other vehicles turns the engine over so it can start and run. This remanufactured starter is designed for dependable, reliable starting throughout the vehicle's service life.
- Wound field direct drive design
- Solenoid attached to the starter
- Starter drive and mounting shims included
- Closed nose cone
- Rated at 1.4 kW and 12 V DC
Quick facts
- Part: TERREPOWER 3631 starter
- Fits: 1981 Chevrolet Impala V6 3.8L and other vehicles
- Condition: Remanufactured
Slow cranking, a single click or no response at the key can mean the starter is worn, though a weak battery, corroded cable ends or a loose connection produces similar symptoms. Before you replace the starter, rule those out first. One starter goes on each engine.
Fits
The 1981 Chevrolet Impala V6 3.8L, the 1981 Chevrolet Malibu V6 3.8L and the 1981 Chevrolet Camaro V6 3.8L take this starter, and so do many other vehicles. If your own vehicle is not named here, look it up in the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Power rating: 1.4 kW
- Voltage: 12 V DC
- Tooth quantity: 9
- Rotation direction: clockwise (right)
Build and materials
- Design: wound field direct drive
- Nose cone type: closed nose
- Solenoid: attached
- Condition: remanufactured
- Country of origin: Mexico
In the box
One starter with its starter drive, attached solenoid and mounting shims. Mounting bolts are not included, so plan on new ones.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this a Chevy Malibu starter that fits the 1981 Chevrolet Malibu V6 3.8L?
Yes. TERREPOWER 3631 is listed for the 1981 Chevrolet Malibu V6 3.8L, and that engine takes one starter.
Does the 3631 work as a Chevy Impala starter for the 1981 Chevrolet Impala V6 3.8L?
Yes. The 1981 Chevrolet Impala V6 3.8L is in the fitment for TERREPOWER 3631, and it takes a single starter.
Does the TERREPOWER 3631 come with mounting bolts?
No. Mounting bolts are not included, so plan on new ones. The starter drive, attached solenoid and mounting shims are included.
What are the rotation direction and voltage of this remanufactured starter?
It turns clockwise (right) and runs on 12 V DC with a 1.4 kW power rating. Its tooth quantity is 9.
Does this starter have over-crank protection?
No. This starter has no over-crank protection. It is a wound field direct drive starter with a closed nose cone and an attached solenoid.
