Walker Products Oxygen Sensor P/N:350-34303
Walker Products 350-34414 oxygen sensor for the 1990-1995 Ford F-150 V8 5.8L, the 1990-1996 F-150 V8 5.0L, the 1991-1994 F-150 V6 3.8L, the 1996-1997 F-150 6-cylinder 4.9L, the 1997-2003 F-150 V8 4.6L or 5.4L, the 1997-2004 F-150 V6 4.2L and other vehicles measures the oxygen in the exhaust gas to show how efficiently the fuel is burning. This direct-fit sensor is made for its specific application and gives the ECU the diagnostic feedback it needs.
A failing oxygen sensor can show up as an engine that runs poorly, higher fuel use, more exhaust emissions or a lit check engine light. Those signs alone do not prove the sensor is at fault, since a vacuum leak is another common cause. With the engine off, the sensor, wiring harness and connector can also be checked for physical damage.
This sensor is listed for a wide range of Ford, Lincoln and Mercury models. Besides the F-150, it is an oxygen sensor for the 1995-2010 Ford Explorer V6 4.0L, the 1996-2001 Explorer V8 5.0L and the 2002-2010 Explorer V8 4.6L, and for the 2005-2008 Ford Escape 4-cylinder 2.3L, the 2009-2010 Escape 4-cylinder 2.5L and the 2010 Escape V6 3.0L. This listing is one sensor, and each application takes one.
Fit and size
Build and materials
Interchange: CTK-OSFD4001
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this oxygen sensor the right one for a 1990-1995 Ford F-150 V8 5.8L?
Yes. Walker Products 350-34414 is listed for the 1990-1995 Ford F-150 V8 5.8L, and each takes one sensor. If your truck or car is not named here, look up its year, model and engine in the "Vehicles it fits" section.
Is this Walker Products oxygen sensor narrow-band or wideband?
This Walker Products 350-34414 is a heated narrow-band sensor with four wires and a 400 mm wiring harness.
What kind of terminals does this oxygen sensor have?
This sensor has male bullet terminals and a male connector with a circle shape. The wire gauge is 20.
Can a worn oxygen sensor hurt fuel economy?
Yes, it can. A failed sensor can make the engine run poorly, use more fuel or turn on the check engine light, and newer vehicles store fault codes in the ECU.
Does Walker Products 350-34414 replace CTK-OSFD4001?
Yes. CTK-OSFD4001 is a cross-reference number for the Walker Products 350-34414 oxygen sensor, and this listing is a single sensor.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.