Walker Products 350-34519 oxygen sensor for the 1996 Dodge Grand Caravan V6 3.0L, the 1996-2000 Grand Caravan V6 3.3L or 3.8L and other vehicles measures the oxygen in the exhaust gas to show how efficiently the engine burns fuel. This Walker Products oxygen sensor is a downstream, narrow-band unit with four wires.
A failed sensor can make the engine run poorly, raise fuel consumption and exhaust emissions, or turn on the malfunction indicator light. A vacuum leak or a misfire can also make an engine run poorly, so these signs alone do not prove the sensor is the problem. Look over the wiring harness and connector for physical damage too, with the engine off and cool.
It is a direct-fit oxygen sensor replacement for the 1996 Dodge Grand Caravan V6 3.0L and the 1996-2000 Grand Caravan V6 3.3L or 3.8L. Among the other vehicles it fits are the 1996-2000 Chrysler Town & Country V6 3.3L or 3.8L, the 1996 Dodge Caravan 4-cylinder 2.4L or V6 3.0L and the 1996-2000 Caravan V6 3.3L or 3.8L; this listing is one sensor and these vehicles take one. If your vehicle is not named here, enter its year and engine on the Buyer's Guide tab.
Fit and size
Build and materials
Is this a Dodge Caravan oxygen sensor for the 1996-2000 Caravan V6 3.3L or 3.8L?
Yes. Walker Products 350-34519 is a downstream oxygen sensor for the 1996-2000 Dodge Caravan V6 3.3L or 3.8L and the 1996 Caravan 4-cylinder 2.4L or V6 3.0L. Look up other vehicles on the Buyer's Guide tab.
Does it work as a Dodge Grand Caravan oxygen sensor for the 1996-2000 Grand Caravan V6 3.3L or 3.8L?
Yes. This sensor fits the 1996-2000 Dodge Grand Caravan V6 3.3L or 3.8L and the 1996 Grand Caravan V6 3.0L, and these vehicles take one.
Is the Walker Products 350-34519 a narrow-band sensor?
Yes. Walker Products 350-34519 is a narrow-band, 4-wire oxygen sensor for the downstream position, with electrodes made of a gas-permeable platinum layer.
Will the check engine light come on if this downstream oxygen sensor fails?
Yes, it can. The malfunction indicator light is one sign, and newer vehicles store fault codes in the ECU that a shop can read to see whether the sensor is involved.
How are the electrodes on this oxygen sensor protected from exhaust residue?
Walker Products 350-34519 has a coating over its electrode surfaces that guards against contamination and erosion from combustion residue and particulates in the exhaust gases.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
