Walker Products Throttle Position Sensor P/N:200-91065
Walker Products 200-91319 throttle position sensor for the 1991-1993 Chevrolet P30 V8 6.2L, the 1994-1999 P30 V8 6.5L and other vehicles detects throttle blade position and sends it to the engine control module (ECM). This full service kit mounts on the throttle body.
Poor acceleration, rough idle or stalling can mean the sensor is failing, though a different fault can show up the same way. With the engine off and cool, look over the connector and wiring for damage or corrosion before replacing the sensor.
The 1991-1993 Chevrolet P30 V8 6.2L, the 1994-1999 P30 V8 6.5L, the 1991-1993 GMC P3500 V8 6.2L, the 1994-1999 P3500 V8 6.5L, the 1995-1997 AM General Hummer V8 6.5L and the 1996 Hummer V8 5.7L all fit this sensor, along with other vehicles. A 1994-1999 Chevrolet P30 V8 6.5L takes one sensor.
Fit and size
Build and materials
One throttle position sensor with its mating connector, pigtail, butt splices and heatshrink. The mounting bracket and mounting hardware are not included, so plan on new fasteners rather than reusing the old ones.
Interchange: 213-879 · 141-453
5S5080 · EC3003 · TPS146DG · 10137417 · 5743243 · TH160 · 14079 · TPS146
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Walker Products 200-91319 throttle position sensor fit the 1994-1999 Chevrolet P30 V8 6.5L?
Yes, Walker Products 200-91319 fits the 1994-1999 Chevrolet P30 V8 6.5L and the 1991-1993 P30 V8 6.2L; if your vehicle is another model, look for it in the "Vehicles it fits" section.
Does this throttle position sensor come with a connector?
Yes, the full service kit includes the mating connector, pigtail, butt splices and heatshrink; the mounting bracket and mounting hardware are not included.
How many terminals does the Walker Products 200-91319 sensor have?
Walker Products 200-91319 has 3 male blade terminals and 3 wires, with one female oblong connector. The wiring harness is 175 mm long.
Is a rough idle a sign this throttle position sensor is going bad?
It can be, but a rough idle has other possible causes. Poor acceleration or stalling can also go with a failing sensor, and a shop can scan for throttle-related codes.
Does 200-91319 replace the 5S5080 throttle position sensor?
Yes. 5S5080 is an interchange number for this sensor, along with 213-879, TPS146 and the other numbers on the Interchange line.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.