Dorman - First Stop Drum Brake Wheel Cylinder P/N:W3731
Help your drum brakes apply smoothly and evenly with the Dorman drum brake wheel cylinder W610156 from the First Stop line, which converts hydraulic pressure from the master cylinder into the force that pushes the brake shoes against the drum. It fits many vehicles, among them the 2003-2008 Toyota Corolla, 2003-2009 Toyota Prius and 2007-2019 Toyota Yaris. See the "Vehicles it fits" section for the full list and engine details.
This direct-replacement wheel cylinder is cataloged for the rear left position. It is manufactured and tested for quality assurance.
Signs a wheel cylinder may need replacing include brake fluid seeping at the drum or backing plate, fluid-soaked brake shoes, a soft or low pedal, or the vehicle pulling to one side when braking. These symptoms can have other causes, so diagnose the brake system before replacing parts. For balanced braking, replacing both rear wheel cylinders together is recommended.
Interchange: 101-1183 · 072-9531 · 375-76001
18E825 · P2489 · 34234 · WC370146 · 4757002020 · 4757020101 · F131908 · WC131908 · 1011183 · 0729531 · 37576001
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does a drum brake wheel cylinder do?
It converts hydraulic pressure from the master cylinder into force that pushes the brake shoes outward against the drum. The W610156 is cataloged for the rear left position.
Does this Dorman wheel cylinder fit the 2003-2009 Toyota Prius?
It is listed for the 2003-2009 Toyota Prius, along with the 2003-2008 Toyota Corolla and 2007-2019 Toyota Yaris. Check the "Vehicles it fits" section to confirm your exact vehicle.
What are the cups and boots made of?
The cups and boots are made from EPDM rubber. The cylinder bores are also surface-tested to provide an optimum sealing surface for the pressure cups.
What are signs a wheel cylinder may need replacing?
Signs include brake fluid seeping at the drum or backing plate, wet brake shoes, a soft pedal, or pulling while braking. Other faults can cause these symptoms, so diagnose the system first.
What is involved in installing a wheel cylinder?
The drum and brake shoes are removed to reach the cylinder, and the brake system is bled after installation. Follow the vehicle service information for the correct procedure and torque specs.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.