Beck/Arnley ABS Wheel Speed Sensor Wiring Harness P/N:084-4937
Beck/Arnley 084-4913 rear left ABS wheel speed sensor wiring harness for the 2010-2013 Toyota Highlander 4-cylinder 2.7L or V6 3.5L carries the wheel speed signal between the sensor and the vehicle's wiring.
A lit ABS warning light can mean this harness is worn or damaged, though the wheel speed sensor or the ABS control module can be behind the same sign. This listing is one harness for the rear left wheel; the rear right wheel takes its own.
It fits the 2010-2013 Toyota Highlander with either the 4-cylinder 2.7L or the V6 3.5L, and it matches OE form, fit and function.
Interchange: 1P2162 · 1406517051 · ABH5 · ALH5 · 895160E090 · 8951648060 · 1530
This part cross-references / interchanges with the following part numbers:
Does the Beck/Arnley 084-4913 fit the 2010-2013 Toyota Highlander 4-cylinder 2.7L or V6 3.5L?
Yes. Beck/Arnley 084-4913 is the rear left wheel speed sensor harness for the 2010-2013 Toyota Highlander with the 4-cylinder 2.7L or the V6 3.5L, and each of those engines takes one.
Is this ABS wheel speed sensor wiring harness for the rear left or the rear right?
It is the rear left harness. The rear right wheel takes a separate part.
Do I have to cut or splice wires to install this harness?
No. Beck/Arnley 084-4913 plugs right in, so there are no wires to cut.
Does 895160E090 cross to this Beck/Arnley harness?
Yes. 895160E090 is one of the numbers listed for Beck/Arnley 084-4913, so this rear left harness is a cross-reference for it.
What does an ABS light tell me about this wheel speed sensor harness?
An ABS warning light is one sign a driver may notice. A shop can test the circuit to see whether the harness is at fault.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.