Dayco Accessory Drive Belt P/N:17355
Dayco 17430 accessory drive belt for the 1980-1982 Toyota Corolla 1.8L and other vehicles is a V-belt that carries engine power to belt-driven accessories such as the alternator, power steering pump and A/C compressor.
A loose tensioner, a misaligned pulley or a seizing accessory can produce a squeal or a damaged belt too, so find the cause before you buy. With the engine off, cracks or frayed edges can mean the belt is worn.
This belt is listed for a wide range of Toyota, Ford, Freightliner and International models, including the 1971-1973 Ford F-250 3.9L / 4.9L and the 1998-2003 Freightliner MT45 5.9L. If your engine or vehicle isn't named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
Which Dayco belt is the serpentine belt for a 1980-1982 Toyota Corolla 1.8L?
Dayco 17430 is listed as the drive belt for the 1980-1982 Toyota Corolla 1.8L. It is a bottom cog V-belt, not a banded belt.
Does Dayco 17430 fit a 1971-1973 Ford F-250 3.9L / 4.9L?
Yes, Dayco 17430 is listed for the 1971-1973 Ford F-250 3.9L / 4.9L, covering the L6-3.9L and L6-4.9L engines.
What are the length and width of the Dayco 17430 V-belt?
The effective length is 43 in (1092.20 mm) and the outside circumference is 43.27 in (1099.06 mm). Top width is .53 in and the angle is 36 degrees.
What temperature range does this bottom cog belt handle?
This belt is rated from -35 °F to 175 °F (-37.2 °C to 79.4 °C). It is a synthetic rubber compound made to SAE J636 and SAE J637.
What does a worn bottom cog V-belt look like?
A worn belt can show cracks between the cogs, shiny glazed sides or missing pieces of rubber.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.