Dayco Accessory Drive Belt P/N:28473
Dayco 17455 right accessory drive belt for the 1971 Ford F-250 V8 5.9L or 6.4L and other vehicles carries engine power to the accessories it drives. This Dayco accessory drive belt listing is one belt for the right side, which takes one; a belt for the other side is ordered separately.
Cracks, fraying, glazed sides or a squeal can mean a belt is worn. Look the belt over with the engine off and cool. Belt noise can also come from a pulley or tensioner, so find out what is causing it before you replace the belt.
Ford, Jeep and Blue Bird models are listed for this belt, including the 1975 Jeep Cherokee 6-cylinder 4.2L, the 1998 Blue Bird All American RE 6-cylinder 8.3L and the 1999 All American RE 6-cylinder 5.9L. If your own year and engine are not named here, look them up on the Buyer's Guide tab before you order.
Fit and size
Build and materials
Does the Dayco 17455 belt fit a 1971 Ford F-250 with the V8 5.9L or 6.4L?
What temperature range is the Dayco 17455 belt made for?
The Dayco 17455 belt has an operating temperature range of -35 F to 175 F (-37.2 C to 79.4 C).
Is this accessory drive belt a banded belt?
No, it is not a banded belt. It has bottom cog construction and is made from a synthetic rubber compound.
What does a worn bottom cog belt look like?
Cracks, fraying and shiny, glazed sides can show wear. A squeal while driving can also be a sign; a shop can check the belt with the engine running.
Which SAE standards does the Dayco 17455 belt carry?
The Dayco 17455 belt is listed to SAE J636 and SAE J637.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.