Dayco Accessory Drive Belt P/N:17340
Dayco 17375 accessory drive belt for the 1976-1977 Toyota Corolla 4-cylinder 1.6L and other vehicles carries engine power from the crankshaft pulley to the accessories the belt drives.
A worn belt can squeal, crack or fray along its edges. With the engine off, look along the whole belt for cracks, frayed edges or missing pieces of the cogged side. Noise can also come from a pulley or tensioner, so find the cause before you swap the belt.
The 1966-1967 Ford F-250 6-cylinder 3.9L or 4.9L and the 1984-1991 Volkswagen Jetta 4-cylinder 1.8L, the 1985-1992 Jetta 4-cylinder 1.6L and the 1990-1993 Jetta 4-cylinder 2.0L each take one of these belts, as does the 1976-1977 Toyota Corolla 4-cylinder 1.6L. For any other car, open the Buyer's Guide tab and look up your exact model and engine.
Fit and size
Build and materials
Is the Dayco 17375 the Toyota Corolla drive belt for a 1976-1977 Toyota Corolla 4-cylinder 1.6L?
Yes. Dayco 17375 fits the 1976-1977 Toyota Corolla 4-cylinder 1.6L, one belt per vehicle. For other cars, check the Buyer's Guide tab.
Will Dayco 17375 fit a 1966-1967 Ford F-250 with the 6-cylinder 3.9L or 4.9L?
Yes. Dayco 17375 fits the 1966-1967 Ford F-250 6-cylinder 3.9L or 4.9L, and each truck takes one belt.
What temperature range is this accessory drive belt made for?
This accessory drive belt operates from -37.2 C to 79.4 C (-35 F to 175 F).
Is this Dayco accessory drive belt a banded belt?
No. This belt is not banded. It has bottom cog construction and a synthetic rubber compound.
Which SAE standards apply to the Dayco 17375 belt?
Dayco 17375 is made to SAE J636 and SAE J637.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.