Dayco 89098 accessory drive belt idler pulley for the 2004-2006 Dodge Ram 1500 V10 8.3L and other vehicles guides the drive belt along its route on the main drive. This Dayco accessory drive belt idler pulley drives no accessory; it turns freely with the belt.
- Flat, smooth pulley face for the main drive position
- Sized for a belt up to 6 rib wide
- Single bearing in the pulley
Quick facts
- Part: Dayco 89098 accessory drive belt idler pulley
- Fits: 2004-2006 Dodge Ram 1500 V10 8.3L and other vehicles
- Position: Main drive, smooth pulley
- Condition: New
A chirp, squeal or grinding from the belt area, or a pulley that feels rough or wobbles when turned by hand with the engine off, can mean the bearing is wearing. A worn belt, a belt tensioner, or a failing alternator or water pump bearing can make similar noise, so find the cause before buying.
Fits
This pulley is listed for a wide range of Dodge and Jeep models. The 2004-2006 Dodge Ram 1500 V10 8.3L takes one, while the 2003-2006 Jeep Wrangler 4-cylinder 2.4L and the 2002-2005 Jeep Liberty 4-cylinder 2.4L take two. If you drive something else, look up your own year, model and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Main drive, smooth pulley
- Quantity per vehicle: 1 or 2, depending on the vehicle
- Maximum belt width: 6 rib
- Bearing inner diameter: 10.15 mm
- Bearing width: 13.4 mm
Build and materials
- Pulley face: flat (smooth)
- Number of bearings: 1
- Condition: New
Interchange: 419-610
38043 · ALT04016 · 580204 · 580260 · 49039 · 45019 · 49025 · 30086 · 900022A · 900039A · 900056A · 900039 · 900056
This part cross-references / interchanges with the following part numbers:
38043, ALT04016, 580204, 580260, 49039, 419-610, 45019, 49025, 30086, 900022A, 900039A, 900056A, 900039, 900056, 4792581AA, 4792 581AA, 4792 581AB, 4792581AC, 5037086AA, 5301 3324AA
Frequently Asked Questions
Does the Dayco 89098 idler pulley fit the 2004-2006 Dodge Ram 1500 V10 8.3L?
Yes. Dayco 89098 is listed for the 2004-2006 Dodge Ram 1500 V10 8.3L, and that engine takes one pulley.
Will this idler pulley work on the 2003-2006 Jeep Wrangler 4-cylinder 2.4L?
Yes. Dayco 89098 is listed for the 2003-2006 Jeep Wrangler 4-cylinder 2.4L, which takes two of these pulleys.
What size bearing is in this smooth idler pulley?
This idler pulley has a single bearing with a 10.15 mm inner diameter and a width of 13.4 mm.
How wide a belt can this main drive idler pulley take?
This pulley has a flat, smooth face and is sized for a belt up to 6 rib wide, in the main drive position.
Does Dayco 89098 replace the 419-610 pulley number?
Yes. 419-610 is one of the interchange numbers listed for Dayco 89098, along with 38043 and 49039.
