Accessory Drive Belt for 1980 Chevrolet Malibu & More - Dayco 15475

Be the first to review this product
$17.99
MPN: 15475
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Dayco Accessory Drive Belt P/N:15475
Dayco Accessory Drive Belt P/N:15475
$17.99

Keep the engine's belt-driven accessories turning with the Dayco Accessory Drive Belt 15475, a cogged V-belt that transmits power from the crankshaft pulley to the driven accessories. It fits many vehicles, among them the 1970-1978 Dodge Charger 5.2L / 5.6L / 5.9L and the 1989-1990 Jeep Wrangler 2.5L — see the Buyer's Guide tab for the full list.

  • Bottom-cog V-belt: Belt construction is bottom cog with a 36° angle and a 0.44 in top width.
  • Sized to spec: 47.50 in (1206.50 mm) effective length and a 48.07 in (1220.98 mm) outside circumference.
  • Material: Black synthetic rubber compound.
  • Operating range: Rated from -35°F to 175°F (-37.2°C to 79.4°C), and built to SAE J636 and SAE J637 standards.

Over time a V-belt can crack, glaze, fray, or lose cogs, which may show up as belt squeal or an accessory that stops spinning; if a worn belt is the cause, this replaces it. Country of origin: Indonesia.

Interchange: L37-1205 · JB-482 · 25-12064 · 25-12073 · 25-7475 · 13-475 · 15-481
L371205 · JB482 · 2512064 · 2512073 · 257475 · 13475 · 15481 · FB15475 · 5475 · 15480 · 2475 · B2475 · RPF2475 · 7475 · 47515 · 6155 · 8473 · 8475

This part cross-references / interchanges with the following part numbers:

15475, FB15475, 5475, 15480, 2475, B2475, RPF2475, 7475, 47515, 6155, 8473, 8475, 13475, 15481, L37-1205, JB482, JB-482, 25-12064, 25-12073, 25-7475, 13-475, 15-481

Frequently Asked Questions

What is the Dayco 15475?

It is a cogged (bottom-cog) V-belt accessory drive belt that transmits power from the crankshaft pulley to the engine's belt-driven accessories.

What vehicles does this belt fit?

It fits many vehicles, such as the 1970-1978 Dodge Charger 5.2L / 5.6L / 5.9L and the 1989-1990 Jeep Wrangler 2.5L. See the Buyer's Guide tab for the full list.

What size is this belt?

It has a 47.50 in (1206.50 mm) effective length, a 48.07 in (1220.98 mm) outside circumference, a 0.44 in top width, and a 36° angle.

What is the belt made of?

It is made from a black synthetic rubber compound and is built to SAE J636 and SAE J637 standards.

What are signs this belt may need replacing?

Cracking, glazing, fraying, missing cogs, or belt squeal can be signs a V-belt may need replacing. Diagnose the cause first; if the belt is at fault, this replaces it.