Generate the hydraulic pressure that operates your brakes with the ADVICS Brake Master Cylinder BMT-039, a new OE-manufactured replacement that drops in for the 1995-1999 Lexus ES300, 1995-1999 Toyota Avalon, 1995-2001 Toyota Camry, and 1999 Toyota Solara. It converts brake-pedal force into hydraulic pressure and sends it through its outlets to the vehicle's brake circuits.
OE-quality build: Aluminium master cylinder body that is anodized and Kanizen plated, with high-quality rubber seals; OEM-exact finishes and coatings provide corrosion protection.
Specs: 25.4 mm bore with two ports; primary and secondary outlets both M10 - 1.0; two mounting holes. Grade type: standard replacement.
Included: single plastic reservoir, master cylinder cap, a gasket/seal, and a sensor.
Not included: mounting hardware, bleeder screw, mounting bracket, dust boot, push rod, bleeder hoses, and brake booster.
If a worn or leaking master cylinder is the cause of a low, sinking, or spongy pedal, this unit replaces it. One is used per application. Country of origin: Japan.
This part cross-references / interchanges with the following part numbers:
13099, 130.4402, MC390292, 47201-33130, MC131444
Frequently Asked Questions
Which vehicles does the BMT-039 fit?
It's a direct-fit replacement for the 1995-1999 Lexus ES300, 1995-1999 Toyota Avalon, 1995-2001 Toyota Camry, and 1999 Toyota Solara. See the Buyer's Guide tab to confirm your vehicle.
What is the bore diameter and outlet thread size?
The master cylinder bore is 25.4 mm. It has two ports, and both the primary and secondary outlets use an M10 - 1.0 thread size.
Does it come with a reservoir?
Yes. It includes a single-type plastic reservoir, a master cylinder cap, a gasket/seal, and a sensor.
What is not included?
Mounting hardware, a bleeder screw, a mounting bracket, a dust boot, a push rod, bleeder hoses, and a brake booster are not included. Consult the service information for any fasteners needed.
What are signs the master cylinder may need replacing?
A brake pedal that sinks slowly, feels spongy, or drops to the floor can signal a failing master cylinder. Diagnose the cause first, since other brake components can produce similar symptoms.
Keep firm brake pedal feel and hydraulic pressure moving to the brake circuits with the ADVICS New OE Brake Master Cylinder BMT-167 (also written BMT167). It drops in as a direct-fit replacement for...
Deliver the firm hydraulic pressure your brakes rely on with the ADVICS Brake Master Cylinder BMT-035 (also written BMT035). This New OE master cylinder drops in as a direct-fit replacement for the...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
