The ADVICS AD1005 front brake pad for the 2006-2007 Toyota Highlander and other vehicles presses against the rotor to slow the car, and it is designed and made under original equipment specifications.
- Approved ceramic friction materials for consistent braking performance
- Quiet, smooth and low-dust operation under all braking conditions
- Brake shims that meet or exceed OE specifications for low noise and reduced vibration
- OEM mirrored slots and chamfers to reduce NVH
- Organic formula for longer pad and rotor life
Squealing or grinding when you brake, a pulsing pedal, or pads worn thin on a visual check can mean the pads are due. Before you replace them, rule out a sticking caliper or a worn rotor, since either one can produce some of the same symptoms.
The 2006-2007 Toyota Highlander, the 2007-2009 Lexus RX350 and the 2006-2008 Lexus RX400h all fit this pad, and so do more models. If your car isn't named here, look it up on the Buyer's Guide tab.
Specifications
- Position: front
- Friction material: ceramic
- Slots and chamfers: OEM mirrored
In the box: stainless steel hardware kits, where applicable.
Interchange / FMSI:
FMSI: D1034V · D1005
Interchange: 089-1805 · 100.10050 · 105.10050 · 1551-1005-01 · AT D1005C · PG-D1005C · PG-D1005M · PG-D1005QS · 04465-48100 · ACT1005 · ACT1005A · GNAD1005 · PXD1005H · EHT1005H · PD1005 · QC1005
This part cross-references / interchanges with the following part numbers:
AD1005, ACT1005, ACT1005A, D1034V, 089-1805, D1005, GNAD1005, PXD1005H, 100.10050, 105.10050, 1551-1005-01, AT D1005C, EHT1005H, PG-D1005C, PG-D1005M, PG-D1005QS, 04465-48100, PD1005, QC1005, 7906-D1005
