ADVICS Disc Brake Rotor P/N:L6F358U
ADVICS F6F124U front brake rotor for the 1998-2016 Subaru Impreza and other vehicles gives the brake pads a surface to clamp against and slows the wheel. Among ADVICS brake rotors, this disc brake rotor is sold as an OE replacement.
A pulsing brake pedal, a shudder while braking or grooves in the rotor face can mean a rotor is worn. Before you replace it, rule out sticking caliper slides, worn pads and an unbalanced wheel, since each can produce a similar shudder.
This rotor is listed for a wide range of Subaru models, led by the 1998-2016 Subaru Impreza, the 1991-2005 Subaru Legacy and the 2000 Subaru Outback. Built to OEM weight, vane count and air gap, it fits each of them; on the 1998-2003 Impreza the engine is the H4-2.5L. If your Subaru is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One front brake rotor. Front rotors are normally changed in pairs, and this listing is one rotor; the front axle takes two, one per wheel.
Interchange: 120.47012 · 320.47012F · 604-13009
31247 · YH145207P · 96658FZN · 26300AE071 · 26310AA091 · 26310AA092 · 26310AA120 · 26310AA121
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will this Subaru Impreza brake rotor fit the 1998-2003 Subaru Impreza with the H4-2.5L?
Yes. ADVICS F6F124U is a front rotor listed for the 1998-2003 Subaru Impreza with the H4-2.5L engine, and for the 2004-2016 Subaru Impreza.
Can I use this Subaru Legacy brake rotor on the front of a 1991-2005 Subaru Legacy?
Yes. ADVICS F6F124U is a front rotor listed for the 1991-2005 Subaru Legacy, and that car takes two of them, one per front wheel.
Is this ADVICS front rotor vented or solid?
Vented. This front rotor has a smooth, non-directional surface and is made of high carbon steel.
How can I tell if these front rotors are worn out?
A pulsing pedal, a shudder while braking or grooves in the rotor face can mean wear. A shop can measure the rotor and tell you whether it is still usable.
Do these ADVICS rotors have a corrosion coating?
Yes. A corrosion protection coating is applied to match OEMs, and the rotor is constructed to OEM weight, vane count and air gap.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.