AISIN Clutch Slave Cylinder P/N:CRT-020
AISIN CRT-014 clutch slave cylinder for the 1995-2004 Toyota Tacoma V6 3.4L and other vehicles moves the clutch release mechanism when hydraulic pressure from the pedal reaches it. This AISIN clutch slave cylinder is a new, OE-manufactured, bolt-on part with a cast iron body.
A soft or sinking clutch pedal, trouble getting into gear, or fluid weeping from the cylinder can mean the slave cylinder is worn. If it is the cause, this cylinder replaces it. First, with the engine off, look at the clutch fluid reservoir: a low level means fluid is going somewhere, so have the hydraulics inspected before you replace this part.
It is a direct-fit replacement for vehicles including the 1995-2004 Toyota Tacoma V6 3.4L, the 2000-2004 Toyota Tundra V6 3.4L and the 1996-2000 Toyota 4Runner V6 3.4L, and the job needs a single cylinder per vehicle. If your vehicle isn't named here, look up its year and engine on the Buyer's Guide tab.
Fit and size
Build and materials
One clutch slave cylinder with its push rod. It is not pre-filled with fluid.
Interchange: 072-9153 · 138.44406 · 31470-35120
386430 · CS360055 · SC682 · LSC257 · 360055 · SH6086 · 5579470
This part cross-references / interchanges with the following part numbers:
Is this the right Toyota Tacoma clutch slave cylinder for the 1995-2004 model years with a V6 3.4L?
Yes. AISIN CRT-014 fits the 1995-2004 Toyota Tacoma V6 3.4L, and the truck needs one. If yours is a different vehicle, look it up on the Buyer's Guide tab.
Does the AISIN slave cylinder come with a push rod, and is it filled with fluid?
Yes, the push rod is included. No, the cylinder is not pre-filled with fluid.
What bore and inlet size does the AISIN CRT-014 have?
The AISIN CRT-014 has a bore diameter of 20.574 mm (0.81 in) and an inlet diameter of 0.39 in. It bolts on through 2 mounting holes.
What are the body and seals of this slave cylinder made of?
The body is cast iron that is anodized and Kanigen plated, which resists corrosion. The seals are high-heat ethylene propylene.
Does this slave cylinder replace the number 31470-35120?
Yes. 31470-35120 is one of the numbers this AISIN CRT-014 replaces; the other cross-reference numbers are on the Interchange line at the bottom of the page.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.