Silence driveline vibration and keep the automatic transmission properly supported with the Anchor transmission mount 3080, a direct-fit replacement for the listed applications: the 2005-2007 Ford Five Hundred, 2005-2007 Ford Freestyle, and 2005-2007 Mercury Montego. Cataloged for the left, rear right position, it helps support and locate the transmission while isolating vibration and limiting powertrain movement. See the "Vehicles it fits" section for engine specifics.
- Supports and dampens: holds the transmission in place and dampens vibration transmitted to the chassis.
- Durable rubber: molded from natural and Styrene Butadiene rubber that resists wear and stays stable as it ages for long service.
- Strong bond: a Chemlock® bonding agent is used for a superior rubber-to-metal bond.
- Built to spec: engineered to OE standards with a CAD/CAM process, and the rubber is set to a specific durometer (hardness) based on the vehicle application.
Signs the original mount may need replacing include vibration at idle, and clunking or shifting movement felt under acceleration, deceleration, or gear changes, along with cracked or separated rubber. If a worn mount is the cause, this replaces it. Any included fasteners are hardened steel with heat-treated Grade #5 bolts.
Interchange: 6201604 · 311080HY · 7543H · A3080HY · 5F9Z6068BA · 613080 · B3080 · 1958 · 3519H · EM3080S
This part cross-references / interchanges with the following part numbers:
6201604, 311080HY, 7543H, A3080HY, 5F9Z6068BA, 613080, B3080, 1958, 3519H, EM3080S
Frequently Asked Questions
What vehicles does the Anchor transmission mount 3080 fit?
It is a direct-fit replacement for the 2005-2007 Ford Five Hundred, 2005-2007 Ford Freestyle, and 2005-2007 Mercury Montego. Check the "Vehicles it fits" section to confirm the fit for your vehicle.
Where is this mount located on the vehicle?
It is cataloged for the left, rear right position, where it helps support and locate the automatic transmission while isolating vibration.
What are the signs my transmission mount may need replacing?
Watch for vibration at idle, clunking or noticeable movement under acceleration, deceleration, or shifting, and cracked or separated rubber. Diagnose the cause before replacing.
What is the Anchor 3080 made of?
It uses natural and Styrene Butadiene rubber that resists wear and stays stable as it ages, bonded to the metal with a Chemlock® agent and set to an application-specific durometer (hardness).
Are mounting fasteners included?
Any included fasteners are hardened steel with heat-treated Grade #5 bolts. Consult the vehicle service information for the correct fasteners and whether they may be reused.
