Anchor Drive Shaft Center Support Bearing P/N:6069
$48.99
(You save)
Smooth out driveline vibration and keep the driveshaft properly located with the Anchor Drive Shaft Center Support Bearing 6069. This center support mounts the driveshaft between the transmission and differential, relieving stress on driveline components. It installs as a direct-fit replacement for the 2002-2006 Honda CR-V [All].
Purpose: Supports and locates the driveshaft between the transmission and differential to help dampen vibration and absorb loads.
Sealed bearing: Uses a sealed, round-shape bearing; grade type is Standard Replacement.
Rubber cushion: Made from high-grade natural and Styrene Butadiene (SBR) rubber that resists wear and stays stable as it ages; a Chemlock® bonding agent creates a strong rubber-to-metal bond.
Housing: Heavy-gauge steel frame; engineered to OE standards using a CAD/CAM process for consistent quality.
Specs: inside diameter 25 mm (1.0001 in), bolt-hole center-to-center 159 mm (6.25 in), and center line to mounting surface 13 mm (0.5 in). Any included fasteners are hardened, heat-treated Grade-5 bolts. Country of origin: China.
Interchange: A60069 · 934001 · 7502 · DS6069 · Manufacturer part number 6069
This part cross-references / interchanges with the following part numbers:
A60069, 934001, 7502, DS6069
Manufacturer's Warranty: 12 Month Warranty.
Frequently Asked Questions
What does this center support bearing do?
It supports the driveshaft between the transmission and differential, relieving stress on driveline components while its rubber cushion helps dampen vibration and absorb loads.
Will this fit my vehicle?
It's a direct-fit replacement for the 2002-2006 Honda CR-V [All]. Check the Buyer's Guide tab to confirm fitment for your specific vehicle.
What are the signs this part may need replacing?
Driveline vibration or noise such as humming or growling that changes with vehicle speed, plus cracked or separated rubber in the cushion, are signs the center support bearing may need replacing.
Is the bearing sealed?
Yes. This unit uses a sealed, round-shape bearing.
What part numbers does this replace?
It interchanges with A60069, 934001, 7502, and DS6069. Its own manufacturer part number is Anchor 6069.
Write a Review
Anchor
Anchor Drive Shaft Center Support Bearing P/N:6069
Keep the driveshaft turning smoothly and cut driveline vibration with the Anchor Drive Shaft Center Support Bearing 6035, a CENTER-mounted support that carries the driveshaft between the transmission...
Keep your driveshaft spinning smoothly and take the load off your driveline with the Anchor Drive Shaft Center Support Bearing 6040. Mounted at the center position, it supports the driveshaft between...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
