Anchor 10199 front engine mount for the 2019-2024 Toyota RAV4 4-cylinder 2.5L and other vehicles helps support the engine and dampens vibration.
- Hydraulic mount type that dampens excess noise and vibration
- Natural and Styrene Butadiene rubber that resists wear and stays stable as it ages
- Chemlock® bonding agent for the rubber-to-metal bond
- Rubber made to specific Durometer (hardness) measurements for each application
Quick facts
- Part: Anchor 10199 engine mount
- Fits: 2019-2024 Toyota RAV4 4-cylinder 2.5L and other vehicles
- Position: Front
- Material: Steel
- Condition: New
A worn engine mount can show up as a clunk when accelerating, decelerating or shifting, vibration at idle, or cracked or separated rubber. Before you replace this mount, rule out the other mounts and any loose hardware as the source of the noise or shake.
Fits
This is a direct-fit engine mount for the 2019-2024 Toyota RAV4 4-cylinder 2.5L, the 2023-2025 Toyota Crown 4-cylinder 2.5L and the 2021-2024 Toyota Venza 4-cylinder 2.5L. This listing is one mount, and the 2023-2025 Toyota Crown 4-cylinder 2.5L takes one.
Specifications
Fit and size
- Position: Front
- Quantity per application: 1
- Stud thread size: M12-1.25, metric
- Stud quantity: 3
Build and materials
- Type: Hydraulic
- Mount material: Steel
- Bracket material: Steel
- Bushing material: Rubber
- Construction: Stamped
- Finish: Painted
- Condition: New
- Warranty: 12 months from Anchor
- Country of origin: China
In the box
One engine mount. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts.
Interchange: A42145 · B42145 · 12361F0090
This part cross-references / interchanges with the following part numbers:
A42145, B42145, 12361F0090
Frequently Asked Questions
Does Anchor 10199 fit as an engine mount for the 2019-2024 Toyota RAV4 4-cylinder 2.5L?
Yes. Anchor 10199 is a front engine mount for the 2019-2024 Toyota RAV4 4-cylinder 2.5L, and that vehicle takes one.
Does the Anchor 10199 engine mount come with bolts or a bracket?
No. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts. The mount itself has three M12-1.25 metric studs.
What rubber do Anchor engine mounts use?
Anchor 10199 uses natural and Styrene Butadiene rubber, bonded to the metal with Chemlock® bonding agent. The rubber is made to a specific Durometer hardness for the application.
Is this Anchor motor mount a hydraulic type?
Yes. Anchor 10199 is a hydraulic engine mount. Hydraulic mounts are filled with special hydraulic fluid to dampen excess noise and vibration.
Does Anchor 10199 replace 12361F0090?
Yes. 12361F0090 is an interchange number for Anchor 10199, along with A42145 and B42145.
