Cylinder Head Gasket for 1999-2004 Honda Odyssey & More - APEX AHG142

Be the first to review this product
$33.99
MPN: AHG142
Item Package Quantity: 1

Have questions?

APEX Automobile Parts Inc Engine Cylinder Head Gasket P/N:AHG142
APEX Automobile Parts Inc Engine Cylinder Head Gasket P/N:AHG142
$33.99

The APEX Automobile Parts Inc AHG142 cylinder head gasket for the 1999-2004 Honda Odyssey 3.5L and other vehicles seals the joint between the engine block and one cylinder head.

  • Seals the combustion chambers to hold compression.
  • Keeps engine oil and coolant from mixing or leaking out at the head joint.
  • Listed for V6-3.2L and V6-3.5L engines.

A leaking cylinder head gasket can show up as coolant loss with no outside leak, white exhaust smoke or overheating. Before you replace it, rule out a cracked cylinder head and coolant leaks at the water pump, radiator or hoses. These V6 engines have two cylinder heads, with one gasket on each. This listing is one gasket, and both heads are normally resealed in the same job.

It is listed for several Honda and Acura models, including the 2003-2004 Honda Pilot 3.5L and the 2001-2003 Acura CL 3.2L. Open the Buyer's Guide tab to check your exact model and engine.

Specifications

  • Quantity per vehicle: 2, one per cylinder head
  • Pieces per box: 1 gasket

In the box

One cylinder head gasket. Head bolts, intake manifold gaskets and valvetrain seals are not included; plan on new head bolts, since the old ones may not be reusable.

Frequently Asked Questions

Does the AHG142 cylinder head gasket fit a 2003-2004 Honda Pilot 3.5L?

Yes. The APEX Automobile Parts Inc AHG142 cylinder head gasket fits the 2003-2004 Honda Pilot 3.5L, and the Buyer's Guide tab shows every model and engine it fits.

Is the AHG142 cylinder head gasket made for the V6-3.2L or the V6-3.5L?

Both. This cylinder head gasket is listed for V6-3.2L and V6-3.5L engines, and each gasket seals one cylinder head.

Are head bolts included with the APEX AHG142 cylinder head gasket?

No. The APEX Automobile Parts Inc AHG142 box holds one cylinder head gasket; head bolts, intake manifold gaskets and valvetrain seals are sold separately, and the old head bolts may not be reusable.

What are signs an engine cylinder head gasket is starting to leak?

Coolant loss with no outside leak, white smoke from the tailpipe or overheating can mean this cylinder head gasket is leaking; a shop can test the cooling system for combustion gases to tell.

Does this cylinder head gasket seal both oil and coolant passages?

Yes. This cylinder head gasket seals the oil and coolant passages between the block and head so the two fluids stay apart and inside the engine, and it also seals the combustion chambers.