Arnott Industries Suspension Strut P/N:SK-2812
Arnott Industries SK-2412 front right suspension strut for the 2003-2006 Mercedes-Benz SL500 and other vehicles is remanufactured to help restore factory ride and handling. Each one is disassembled and rebuilt from the ground up, then tested in the USA.
A leaking strut, a bouncy or harsh ride or a clunk over bumps can mean this suspension strut is worn, though a worn sway bar link or control arm bushing can be behind the same signs, so find the cause before replacing it.
It fits the 2003-2006 Mercedes-Benz SL500 and the 2003-2006 Mercedes-Benz SL600. A 2003-2006 Mercedes-Benz SL500 takes one on the front right, so this listing covers that corner; the front left is a separate part ordered separately, and the two sides are normally replaced together.
Fit and size
Build and materials
One front right suspension strut as a complete assembly. Mounting hardware and a bearing plate are not included; the old hardware may not be reusable, so plan on new pieces.
Interchange: 2303202813 · 2303208813 · 230320881380
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Arnott Industries SK-2412 a strut replacement for the 2003-2006 Mercedes-Benz SL500?
Yes. Arnott Industries SK-2412 is a front right suspension strut that fits the 2003-2006 Mercedes-Benz SL500, and it also fits the 2003-2006 Mercedes-Benz SL600.
Does this front right suspension strut come with the spring and boot?
Yes. It is a complete assembly with the coil spring, spring seat, spring isolators and boot. Mounting hardware and a bearing plate are not included.
What mounts does the SK-2412 suspension strut have?
The Arnott Industries SK-2412 has a bolt-type upper mount and a loop/eyelet lower mount. Its body end measuring point is the center eye.
How can I tell if a front right suspension strut is wearing out?
Fluid on the strut body, a bouncy or harsh ride or a clunk over bumps can mean wear. A shop can test the strut if you are unsure.
Is this Arnott suspension strut new or remanufactured?
It is remanufactured: disassembled, rebuilt from the ground up and tested in the USA. Its polyurethane seal was designed and tested with one of the largest seal manufacturers.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.