Atlantic Automotive Engineering 6906N power steering pump for the 1997-2001 BMW 740i and other vehicles supplies the hydraulic pressure behind power-assisted steering. This new pump is a direct replacement for a failed original pump, built to OE-level performance, fit and function.
- Each pump is 100% hydraulically tested under load in the USA
- Upgraded shaft is heat treated to prevent premature failure
- Aluminum housing on a hydraulic-type pump
- Hose barb port with a clamp-on inlet and a banjo outlet
Quick facts
- Part: Atlantic Automotive Engineering 6906N power steering pump
- Fits: the 1997-2001 BMW 740i and other vehicles
- Material: Aluminum (housing)
- Condition: New
A whine or groan when you turn, steering that feels heavy, or fluid seeping around the pump can all point to a worn pump. Before you replace the pump, rule out a leaking hose or a fluid level that has dropped, since either can make the steering noisy or heavy too. The steering system has a single pump, so one is all the car takes.
Fits
It fits the 1997-2001 BMW 740i, the 1993-2001 BMW 740iL and the 1995-2001 BMW 750iL.
Specifications
Fit and size
- Quantity per vehicle: 1
- Inlet diameter: 18.0 mm
- Outlet diameter: 14.0 mm
- Pulley attachment: bolt-on
- Reservoir: remote, not included
Build and materials
- Type: hydraulic
- Housing material: aluminum
- Hose port type: hose barb, clamp-on inlet, banjo outlet
- Grade: standard replacement
- Condition: new
- Country of origin: China
In the box
One new hydraulic power steering pump. The pulley, reservoir, reservoir cap, filter and mounting hardware are not included; plan on new bolts, since the old ones may not be reusable.
Installation notes
- Flush and fill the steering system with an OE approved power steering fluid to protect the pump's life and operation.
- Replacing the steering fluid reservoir along with the pump is highly recommended, because a clogged reservoir can starve the replacement pump.
Interchange: 32411141569 · 32411141570
Frequently Asked Questions
Is this a 1997-2001 BMW 740i power steering pump?
Yes. The Atlantic Automotive Engineering 6906N fits the 1997-2001 BMW 740i. The pump is sold new, one per listing.
Will the 6906N work as a 1993-2001 BMW 740iL power steering pump?
Yes. The 6906N fits the 1993-2001 BMW 740iL, and it also fits the 1995-2001 BMW 750iL.
Does the Atlantic Automotive Engineering power steering pump come with the pulley?
No. The Atlantic Automotive Engineering 6906N is the pump only. The pulley, reservoir, reservoir cap, filter and mounting hardware are not included.
What size are the inlet and outlet ports on the 6906N?
The inlet is 18.0 mm in diameter with a clamp-on attachment, and the outlet is 14.0 mm with a banjo attachment. The ports are hose barb type.
Should I swap the reservoir when I install the 6906N pump?
Yes, it is highly recommended. A clogged reservoir can starve the new pump of fluid, and this pump does not come with a reservoir.
