Absorb crankshaft vibration with the ATP engine harmonic balancer 102054, a direct-fit replacement for the 1989-1992 Buick Century and Buick Skylark, the 1992 Oldsmobile Achieva, the 1989-1991 Oldsmobile Cutlass Calais, the 1989-1992 Oldsmobile Cutlass Ciera and Cutlass Cruiser, and the 1992 Pontiac Grand Am — all built with the V6-3.3L engine.
A harmonic balancer dampens the twisting vibrations of the crankshaft as the engine runs. It's typically built in three pieces: a hub that bolts directly to the crankshaft, a rubber or fluid layer that surrounds the hub and absorbs vibration, and a metal outer ring grooved for the drive belt.
Vibration control: the damping layer soaks up crankshaft harmonics to help keep the rotating assembly steady.
Grooved outer ring: the metal outer pulley carries the engine drive belt.
Signs it may need replacing: over time the rubber or fluid layer deteriorates and the outer pulley can shift forward, causing belt misalignment; a separated or wobbling balancer should be replaced.
Direct fit: designed to match the fit and function of the original unit on the listed applications.
What does the ATP engine harmonic balancer 102054 do?
It dampens the twisting vibrations of the crankshaft. A hub bolts to the crankshaft, a rubber or fluid layer absorbs vibration, and a grooved metal outer ring drives the engine belt.
Does this balancer fit a Buick Century?
Yes. This Buick Century harmonic balancer fits 1989-1992 Buick Century models with the V6-3.3L engine, along with several other listed GM applications. See the Buyer's Guide tab to confirm your vehicle.
What are the signs of a failing harmonic balancer?
The rubber or fluid layer can deteriorate over time, letting the outer pulley shift forward and causing belt misalignment. A wobbling, separated, or cracked balancer should be replaced.
Is the 102054 a direct-fit replacement?
Yes. It is designed to match the fit and function of the original harmonic balancer on the listed V6-3.3L applications, installing in place of the factory unit.
Where is this harmonic balancer made?
The country of origin for the ATP 102054 harmonic balancer is China.
The purpose of an harmonic balancer is to absorb crankshaft vibrations. Harmonic balancers are typically constructed in three pieces. The first piece is often called a hub. It bolts to directly to...
Tame crankshaft vibration and keep the accessory belt tracking true with the ATP engine harmonic balancer (P/N 102134). It installs as a direct-fit replacement on the 1995-1998 Nissan 200SX [L4-1.6L]...
ATP Engine Harmonic BalancerThe purpose of an harmonic balancer is to absorb crankshaft vibrations. Harmonic balancers are typically constructed in three pieces. The first piece is often called a hub...
The purpose of an harmonic balancer is to absorb crankshaft vibrations. Harmonic balancers are typically constructed in three pieces. The first piece is often called a hub. It bolts to directly to...
The purpose of an harmonic balancer is to absorb crankshaft vibrations. Harmonic balancers are typically constructed in three pieces. The first piece is often called a hub. It bolts to directly to...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
