Replace a leaking, dented or cracked pan with the ATP Oil Pan, part number 103410, a replacement from ATP's Graywerks line that holds the oil supply at the base of the engine. It is a direct-fit replacement for many vehicles with the V6-3.6L engine, among them the 2012-2016 Jeep Wrangler 3.6L, the 2011-2016 Dodge Charger 3.6L and the 2011-2016 Chrysler 300 3.6L; see the "Vehicles it fits" section for the full list.
The oil pan closes off the bottom of the engine and acts as the reservoir that the oil pump draws from. It hangs low under the vehicle, so road debris and off-road impacts can dent or crack it. If a damaged or leaking pan is the source of your oil loss, this part replaces it.
- Part type: engine oil pan from ATP's Graywerks line.
- Position: lower, lower front.
- Engine: V6-3.6L. The listed applications use one pan.
- Country of origin: Taiwan.
Signs a pan may need replacing include oil spots or drips under the vehicle, an oily film on the pan, and visible dents or cracks. Other seals can leak onto the pan, so confirm where the leak starts before replacing it. Consult the vehicle service information for the correct sealing method and fasteners, and for whether the original fasteners may be reused. If you are shopping for a 2012-2016 Jeep Wrangler 3.6L oil pan, check the "Vehicles it fits" section against your vehicle's engine.
Interchange: 5184546AC
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this the right 2011-2016 Chrysler 300 3.6L oil pan for my car?
ATP 103410 is listed for the 2011-2016 Chrysler 300 with the V6-3.6L engine. Check the "Vehicles it fits" section against your vehicle's engine before ordering.
What other vehicles does ATP 103410 fit?
It is also listed for the 2012-2016 Jeep Wrangler and 2011-2016 Dodge Charger, both with the V6-3.6L engine, among other vehicles; see the "Vehicles it fits" section for the full list.
What are signs an oil pan may need replacing?
Oil drips or spots under the vehicle, an oily film on the pan, or visible dents or cracks from road impact. Confirm where the leak starts first, because other seals can leak onto the pan.
What part number does ATP 103410 interchange with?
It interchanges with 5184546AC.
Which position does this oil pan install in?
It is listed for the lower, lower front position on the V6-3.6L engine in the listed vehicles. The listed applications use one pan.
