Dorman - OE Solutions Automatic Transmission Oil Cooler Hose Assembly P/N:624-304
Dorman 624-281 auto trans oil cooler hose assembly for the 2005-2010 Jeep Grand Cherokee V6 3.7L, the 2006-2010 Grand Cherokee V8 6.1L and other vehicles carries transmission fluid between the transmission and its oil cooler. It is the transmission oil cooler pressure and return line, covering the inlet and outlet.
Fluid spots under the vehicle, wet or corroded fittings, or a damaged hose can mean the hose assembly is leaking. Before you replace this assembly, rule out a leak at the cooler itself or at another fitting, since transmission fluid on the ground can come from more than one place. A leaking hose assembly should be looked at promptly.
It is a direct-fit replacement for the 2005-2010 Jeep Grand Cherokee V6 3.7L, the 2006-2010 Grand Cherokee V8 6.1L and the 2006-2010 Jeep Commander V6 3.7L. One assembly handles the inlet and outlet on these cars, and this listing is that one assembly.
Fit and size
Build and materials
One auto trans oil cooler hose assembly.
Interchange: 55038177AA · 55038177AB · 55038177AC · 55038177AE · 55116877AC · 55116877AD · 55116877AE · 55116877AF · 5801493
This part cross-references / interchanges with the following part numbers:
Does the Dorman 624-281 fit the 2006-2010 Jeep Commander V6 3.7L?
Yes. Dorman 624-281 is a direct-fit replacement for the 2006-2010 Jeep Commander V6 3.7L, and also for the 2005-2010 Jeep Grand Cherokee V6 3.7L and the 2006-2010 Grand Cherokee V8 6.1L.
What pressure and temperature limits does this transmission oil cooler hose assembly have?
Dorman 624-281 has a maximum working pressure of 100 psi. Its operating temperature range runs from -40°F to 329°F.
Does this oil cooler hose assembly come with a gasket or seal?
Yes. The package holds one auto trans oil cooler hose assembly with a gasket or seal included.
How can I tell if my transmission oil cooler hose assembly is leaking?
Look for fluid spots under the vehicle, wet or corroded fittings, or a damaged hose, checking with the engine off and cool. A shop can test the cooler circuit if you are unsure.
What are the end connections and length of this oil cooler hose assembly?
End 1 has male threads with a 7.5 mm inside diameter, and end 2 type is listed as none. The straight hose is 9.1 inches long.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.