Fuel Pump Module for 2004-2005 Ford Explorer & More - Autobest F1360A

$166.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: F1360A
    UPC: 072845113603
    Condition: New
    Weight: 6.36 LBS
    Item Package Quantity: 1
    $166.99
    Adding to cart… The item has been added

    Have questions?

    Autobest Fuel Pump Module Assembly P/N:F1360A
    Autobest Fuel Pump Module Assembly P/N:F1360A
    $166.99
    $166.99

    Autobest F1360A fuel pump module for the 2004-2005 Ford Explorer V8 4.6L and other vehicles moves fuel from the tank to the engine. Also called a fuel pump assembly, it combines a turbine pump with a fuel sending unit and an internal strainer inside the fuel tank.

    • Turbine pump rated at 50.2 GPH average flow with a 12 A average current draw
    • Ethanol tolerance for today's fuel systems
    • FKM gasket or seal supplied with the module
    • Tested at every interval of the manufacturing process

    Quick facts

    • Part: Autobest F1360A fuel pump module
    • Also called: fuel pump assembly
    • Fits: 2004-2005 Ford Explorer V8 4.6L and other vehicles
    • Condition: New

    Hard starting, sputtering, stalling or an erratic fuel gauge can mean a worn pump module. If the module is the cause, this one replaces it. A clogged fuel filter is another common source of the same symptoms, so these signs alone do not prove the pump is at fault.

    Fits

    This module is a direct-fit replacement for the 2004-2005 Ford Explorer V8 4.6L and the 2004-2005 Mercury Mountaineer V8 4.6L. Each takes one, mounted in the tank.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Voltage: 12V
    • Pump pressure: 79.8 to 108.8 PSI
    • Outlet: quick connect, 3/8
    • Inlet type: strainer
    • Connectors: 2, rectangle and round, female
    • Terminals: 10, male pin
    • Resistance: 15 ohms empty, 162 ohms full

    Build and materials

    • Pump type: turbine
    • Mounting: in tank, internal strainer
    • Gasket or seal material: FKM
    • Condition: new
    • Country of origin: China

    In the box

    One fuel pump module with a fuel sending unit, a strainer and a gasket or seal. Not included: wire harness, fuel filter, mounting hardware, regulator and fuel tank pressure sensor. Plan on new fasteners, since the old ones may not be reusable.

    Interchange: 4L2Z-9H307CB · 4L2Z-9H307CC · 5L2Z-9H307A · 7L2Z-9H307B · PFS-288 · PFS-357 · PFS-417
    E2359M · 66059 · 69161 · P76247M · FG0876 · P2596S · P2606S · SP2076M · 150226 · USEP2359M · TU278

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    E2359M, 66059, 69161, P76247M, FG0876, 4L2Z-9H307CB, 4L2Z-9H307CC, 5L2Z-9H307A, 7L2Z-9H307B, PFS-288, PFS-357, PFS-417, P2596S, P2606S, SP2076M, 150226, USEP2359M, TU278

    Frequently Asked Questions

    Is the Autobest F1360A fuel pump module right for the 2004-2005 Mercury Mountaineer V8 4.6L?

    Yes. Autobest F1360A fits the 2004-2005 Mercury Mountaineer V8 4.6L, and that vehicle takes one module.

    Does the F1360A come with a fuel sending unit and strainer?

    Yes, Autobest F1360A includes a fuel sending unit, a strainer and a gasket or seal. The wire harness, fuel filter, mounting hardware and regulator are not included.

    What pressure and flow does this fuel pump module deliver?

    This fuel pump module runs at 79.8 to 108.8 PSI pump pressure with an average flow of 50.2 GPH on 12V.

    Could hard starting or stalling mean the fuel pump module is wearing out?

    Yes, hard starting, stalling and sputtering can point to a worn pump module, as can an erratic fuel gauge from the level sender. Have it tested or replaced promptly rather than driving on it.

    Does Autobest F1360A replace number 4L2Z-9H307CB?

    Yes, Autobest F1360A replaces 4L2Z-9H307CB, along with other numbers such as 5L2Z-9H307A and PFS-288.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review