Autobest F1538A front fuel pump module for the 2009-2010 Ford E-150 V8 4.6L or 5.4L and other vehicles moves fuel from the tank to the engine. This fuel pump module, also called a fuel pump assembly, is an in-tank unit built around a turbine pump.
- Turbine pump with a 50.2 GPH average flow rating and 55-65 PSI pump pressure
- Ethanol tolerance for today's fuel systems
- Fuel filter, strainer, fuel sending unit and regulator included
- POM housing with an FKM gasket or seal
- Tested at every interval of the manufacturing process
Quick facts
- Part: Autobest F1538A fuel pump module
- Also called: fuel pump assembly
- Fits: 2009-2010 Ford E-150 V8 4.6L or 5.4L and other vehicles
- Position: Front
- Material: POM housing, FKM gasket or seal
- Condition: New
Hard starting, stalling or an erratic fuel gauge can be signs of a worn pump or sending unit. Before you replace the module, rule out a blown fuel pump fuse or relay, a clogged fuel filter and a wiring fault, since any of them can also leave you with a hard start or a stall. This listing is one module, and the fitment calls for one per vehicle.
Fits
Among the vehicles it fits are the 2009-2010 Ford E-250 V8 4.6L or 5.4L and the 2009-2010 Ford E-350 Super Duty V8 5.4L or V10 6.8L. It is a direct-fit replacement for these vehicles.
Specifications
Fit and size
- Position: front
- Quantity per vehicle: 1
- Connector: 1 rectangular, male
- Terminals: 4 male pin terminals
- Outlet: 1, quick connect
- Voltage: 12V, negative ground
Build and materials
- Pump type: turbine, in tank
- Average flow rating: 50.2 GPH
- Pump pressure: 55-65 PSI
- Average current draw: 13 A
- Sending unit resistance: 181 ohms empty, 10 ohms full
- Housing material: POM; gasket or seal material: FKM
- Condition: new
- Warranty: Autobest 12-month unlimited-mileage warranty
- Country of origin: China
In the box
One fuel pump module with a fuel filter, strainer, fuel sending unit, regulator and gasket or seal. Mounting hardware and the fuel tank pressure sensor are not included, and the old mounting hardware may not be reusable, so plan on new pieces.
Interchange: 9C2Z-9H307C · PFS-479
E2527M · P76474M · FG1313 · SP2376M · USEP2527M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
E2527M, P76474M, FG1313, 9C2Z-9H307C, PFS-479, SP2376M, USEP2527M
Frequently Asked Questions
Does the Autobest F1538A fit a 2009-2010 Ford E-150 V8 4.6L or 5.4L?
Yes, Autobest F1538A fits the 2009-2010 Ford E-150 with the V8 4.6L or 5.4L engine. If your vehicle is a different model, look for it in the "Vehicles it fits" section.
What comes with the Autobest F1538A fuel pump module?
Autobest F1538A includes the pump, fuel filter, strainer, fuel sending unit, regulator and gasket or seal. Mounting hardware and the fuel tank pressure sensor are not included.
What pressure and flow rating does this turbine fuel pump module have?
This module's turbine pump runs at 55-65 PSI with a 50.2 GPH average flow rating. It is a 12V unit with an average current draw of 13 A.
Can hard starting or a wrong fuel gauge reading mean the fuel pump module is failing?
Yes, they can be signs of a failing pump or sending unit, which this module includes, though other parts can cause them too. The sending unit is specified at 181 ohms empty and 10 ohms full, and a shop can test it.
Is 9C2Z-9H307C a cross-reference for the Autobest F1538A?
Yes, 9C2Z-9H307C is on the interchange line for Autobest F1538A, along with PFS-479 and the other numbers listed there.
