Autobest Fuel Pump Module Assembly F2532A

Autobest Fuel Pump Module Assembly P/N:F2532A

Be the first to review this product

$115.99

MPN: F2532A

Item Package Quantity: 1

Current Stock:

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Autobest Fuel Pump Module Assembly P/N:F2532A

$115.99

Description

Feed your engine a steady flow of fuel with the AUTOBEST fuel pump module assembly F2532A, an in-tank turbine-style unit that draws fuel from the tank and delivers it toward the engine. It installs as a direct-fit replacement for the 2001-2003 Pontiac Aztek and 2002-2003 Buick Rendezvous, both with the V6-3.4L engine. If a worn or failing pump is behind hard starting, stalling, or a loss of fuel pressure, this module replaces it.

Complete module: arrives as a ready-to-drop-in fuel pump assembly with an integrated fuel sending unit, fuel tank pressure sensor, in-tank strainer, wire harness, and NBR gasket/seal.
Electrical & flow: 12V pump with a 33 GPH average flow rating and roughly 7A average current draw; sending unit reads 40 ohms empty to 250 ohms full.
Built for modern fuel: POM housing and top-grade components with superior ethanol tolerance for today's fuel blends.
Connections: 5/16 quick-connect inlet, 3/8 quick-connect outlet, and a single 4-pin male connector.

Note: fuel filter, pressure regulator, and mounting hardware are not included. Country of origin: China.

Manufacturer's Description

Product Specs

Buyer's Guide

Interchange Part Numbers

Frequently Asked Questions

What comes with the AUTOBEST fuel pump module assembly F2532A?

It's a complete in-tank module with the turbine pump, fuel sending unit, fuel tank pressure sensor, in-tank strainer, wire harness, and an NBR gasket/seal.

Does this fuel pump module fit my vehicle?

It's a direct-fit replacement for the 2001-2003 Pontiac Aztek and 2002-2003 Buick Rendezvous with the V6-3.4L engine. Check the Buyer's Guide tab to confirm your application.

Is a fuel filter, regulator, or mounting hardware included?

No. This module does not include a fuel filter, pressure regulator, or mounting hardware.

What type of pump is this and where does it mount?

It uses a turbine-style pump and mounts inside the fuel tank (in-tank). It runs on 12V with a 33 GPH average flow rating and about 7A average current draw.

What are the inlet and outlet connections?

The module has a 5/16 quick-connect inlet and a 3/8 quick-connect outlet, plus a single 4-pin male electrical connector.