Autobest Fuel Pump Module Assembly P/N:F4586A
Autobest F3000A fuel pump module for the 1996 Jeep Grand Cherokee 6-cylinder 4.0L or V8 5.2L moves fuel from the tank toward the engine. This fuel pump assembly sits in the tank and combines a turbine pump, an internal strainer and a fuel sending unit.
Hard starting, stalling, sputtering under load or an erratic fuel gauge can mean the pump or sending unit is worn, though a clogged fuel filter or a faulty relay can be behind them. The vehicle takes one module, installed in the tank.
This module fits the 1996 Jeep Grand Cherokee with either the 6-cylinder 4.0L or the V8 5.2L engine.
Fit and size
Build and materials
One fuel pump module with the pump, strainer, fuel sending unit, regulator and gasket or seal. The wire harness, fuel filter, fuel tank pressure sensor and mounting hardware are not included; plan on new fasteners, since the old ones may not be reusable.
Interchange: 953-3048 · 520-2150 · 402-P7099M
MU198 · E7099M · 67646 · P74708M · FG0225 · EFP131M · EG099M · EG099MC · P833M · PN3082 · SP7099M · 150183 · USEP7099M · TU131
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Autobest F3000A fit the 1996 Jeep Grand Cherokee with the 4.0L or the 5.2L engine?
Yes. The Autobest F3000A fuel pump module fits the 1996 Jeep Grand Cherokee 6-cylinder 4.0L and V8 5.2L, one module per vehicle.
What comes with this Autobest fuel pump module, and what is left out?
The pump, strainer, fuel sending unit, regulator and gasket or seal are included. The wire harness, fuel filter, fuel tank pressure sensor and mounting hardware are not.
What pressure and flow does the Autobest F3000A turbine pump deliver?
Pump pressure is 48-54 PSI, with an average flow rating of 31.7 GPH. The module runs on 12V with an average current draw of 7.3 A.
How can I tell if this fuel pump module is going bad?
Hard starting, stalling or sputtering, and an erratic fuel gauge can be signs of a worn module. A shop can test the fuel system safely.
What resistance values does this fuel pump module show when the tank is empty and full?
The module's resistance is 220 ohms when empty and 20 ohms when full, and it includes the fuel sending unit.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.