Fuel Pump Module for 1995 Dodge Ram 1500 & More - Autobest F3097A

$155.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: F3097A
    UPC: 072845130976
    Condition: New
    Weight: 6.91 LBS
    Item Package Quantity: 1
    $155.99
    Adding to cart… The item has been added

    Have questions?

    Autobest Fuel Pump Module Assembly P/N:F3097A
    Autobest Fuel Pump Module Assembly P/N:F3097A
    $155.99
    $155.99

    Autobest F3097A fuel pump module for the 1995 Dodge Ram 1500 V6 3.9L, V8 5.2L or 5.9L and other vehicles sends fuel from the tank to the engine. It mounts inside the tank.

    • Gerotor pump with an average flow rating of 33.1 GPH
    • 12V pump with an average current draw of 8 A
    • Tolerates the ethanol found in today's fuel
    • Pumps are tested at each stage of manufacturing
    • Housing made of POM

    Quick facts

    • Part: Autobest F3097A fuel pump module
    • Also called: fuel pump assembly
    • Fits: the 1995 Dodge Ram 1500 V6 3.9L, V8 5.2L or 5.9L and other vehicles
    • Material: POM housing
    • Condition: New

    Hard starting, stalling, a whine from the tank or a loss of power under load can mean the pump is weakening. Before you replace the module, rule out a blown fuse, a bad relay, wiring trouble and a clogged fuel filter, since any of them can produce similar symptoms. A shop can test fuel pressure.

    Fits

    It fits the 1995 Dodge Ram 1500 V6 3.9L, V8 5.2L or 5.9L, the 1995 Dodge Ram 2500 V8 5.2L or 5.9L and the 1995 Dodge Ram 3500 V8 5.9L, and each takes one.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Mounting: in tank
    • Outlet: 3/8, quick connect
    • Connector: 1 female, rectangle shape
    • Terminals: 4 male pin
    • Fuel sender resistance: 104 ohms empty, 5 ohms full

    Build and materials

    • Pump type: gerotor
    • Pump pressure: 95 to 110 PSI
    • Voltage: 12V
    • Strainer: internal
    • Housing material: POM
    • Condition: New
    • Country of origin: China

    In the box

    One fuel pump module with the fuel sending unit, strainer, regulator and a gasket or seal. The wire harness, fuel filter, fuel tank pressure sensor and mounting hardware are not included; the old hardware may not be reusable, so plan on new pieces.

    Interchange: 953-3009 · 520-2290 · 402-P7086M
    MU42 · E7086M · P247M · P254M · 67636 · P74695M · FG0202 · EFP7086M · EG086M · SP7086M · 150075 · USEP7086M · TU107

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    MU42, E7086M, P247M, P254M, 67636, P74695M, 953-3009, FG0202, 520-2290, EFP7086M, EG086M, 402-P7086M, SP7086M, 150075, USEP7086M, TU107

    Frequently Asked Questions

    Is the Autobest F3097A fuel pump module right for the 1995 Dodge Ram 1500 V6 3.9L, V8 5.2L or 5.9L?

    Yes. Autobest F3097A fits the 1995 Dodge Ram 1500 with the V6 3.9L, V8 5.2L or 5.9L engine, and each truck takes one module.

    Does the Autobest F3097A come with a wire harness or mounting hardware?

    No. The wire harness, fuel filter, fuel tank pressure sensor and mounting hardware are not included. The module comes with the sending unit, strainer, regulator and a gasket or seal.

    What size is the outlet on this fuel pump assembly?

    The outlet is a 3/8 quick-connect. The electrical connector is one female rectangle, and the module has four male pin terminals.

    What pressure range does this fuel pump module run at?

    Pump pressure is 95 to 110 PSI, and the pump runs on 12V with an average flow rating of 33.1 GPH.

    What fuel sender resistance does this module read?

    The sending unit reads 104 ohms when empty and 5 ohms when full. A shop can compare a gauge problem against those two values.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review