Autobest Fuel Pump Module Assembly P/N:F2532A
Autobest F4947A fuel pump module for the 2009-2012 Audi Q5 V6 3.2L and the 2011-2012 Q5 4-cylinder 2.0L supplies the engine with fuel and reports the fuel level to the gauge. This in-tank fuel pump assembly draws fuel through an internal strainer and controls fuel pressure with its regulator.
A failing fuel pump module can show up as hard starting or a loss of power under load, and a worn sending unit can leave the fuel gauge reading wrong. Before you replace the module, rule out a blown fuse, a faulty relay or a damaged wire at the connector, since any of these can also cut power to the pump.
It is a direct-fit replacement for the 2009-2012 Audi Q5 V6 3.2L and the 2011-2012 Q5 4-cylinder 2.0L, and both take one module.
Fit and size
Build and materials
One fuel pump module, including its fuel filter. Mounting hardware, the gasket or seal and a fuel tank pressure sensor are not included; the old hardware and seal may not be reusable, so plan on new ones.
Interchange: 8R0-919-051A · 8R0-919-051N001
E8936M · P77437M · FG1575 · SP5127M · 150336
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Autobest F4947A fit a 2011-2012 Audi Q5 with the 4-cylinder 2.0L?
Yes. The Autobest F4947A fits the 2011-2012 Audi Q5 4-cylinder 2.0L, and it also fits the 2009-2012 Q5 V6 3.2L.
Does the F4947A fuel pump module come with a new seal or mounting hardware?
No. The Autobest F4947A includes the module with its fuel filter, strainer, regulator and fuel sending unit; the gasket or seal and the mounting hardware are not included.
What pressure and flow is this turbine fuel pump module rated for?
This fuel pump module is rated for 95.7 to 101.5 PSI of pump pressure and a 43.6 GPH average flow at 12V, with a 16.5 A average current draw.
What can a jumpy fuel gauge mean on a car with this sending unit?
A fuel gauge that reads wrong, jumps around or sticks on empty can mean a worn sending unit; the sending unit in this fuel pump module is rated 59 ohms at empty and 290 ohms at full, and a shop can test it.
Is this Autobest fuel pump module ethanol tolerant?
Yes. This fuel pump module is built for ethanol tolerance in today's fuel systems and is tested at many points during manufacturing for durability and reliability.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.