Autobest Fuel Pump Module Assembly P/N:F3193A
Autobest F6194A fuel pump module for the 2013-2018 Nissan Altima V6 3.5L and the 2013-2019 Altima 4-cylinder 2.5L moves fuel from the tank to the engine through a turbine pump. Also sold as a fuel pump assembly, it sits inside the tank and draws fuel through an internal strainer.
Hard starting, stumbling under load or a whine from the tank can mean the pump is worn, though a clogged fuel filter or a faulty fuel pump relay can be behind them too, so find the cause before you replace the module.
This module fits the 2013-2018 Nissan Altima V6 3.5L and the 2013-2019 Altima 4-cylinder 2.5L.
Fit and size
Build and materials
One fuel pump module with a fuel sending unit, strainer and regulator; either engine uses one module. The wire harness, fuel filter, fuel tank pressure sensor, mounting hardware and gasket or seal are not included, so plan on new mounting hardware rather than reusing the old.
Interchange: 17040-3TA0A · 17040-3TA0B · 17040-3TA0C · 17040-3TA0D
E9183M · P77017M · FG1772 · SP4090M · USEP9183M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Autobest F6194A the right fuel pump module for the 2013-2018 Nissan Altima V6 3.5L?
Yes. Autobest F6194A fits the 2013-2018 Nissan Altima V6 3.5L and the 2013-2019 Altima 4-cylinder 2.5L, and each engine uses one module.
What does the Autobest F6194A include besides the pump?
Autobest F6194A comes with a fuel sending unit, an internal strainer and a regulator. The wire harness, fuel filter, fuel tank pressure sensor, mounting hardware and gasket or seal are not included.
What flow and pressure is this turbine fuel pump rated for?
This pump has a 40 GPH average flow rating and 80 to 90 PSI pump pressure on 12V, drawing 6.5 A on average.
What resistance values does the sending unit in this fuel pump module read?
The fuel sending unit reads 283 ohms empty and 51 ohms full. If the fuel gauge acts up, a shop can test the unit on the vehicle.
Is this fuel pump module built to tolerate ethanol in the fuel?
Yes. This fuel pump module is built for ethanol tolerance in today's fuel systems, and its housing is made of POM.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.