Beck/Arnley Brake Hydraulic Hose P/N:073-1451
Keep firm, responsive braking on the front-left corner with the Beck/Arnley Brake Hydraulic Hose 073-1907 (also written 0731907). This flexible brake hose carries pressurized brake fluid from the vehicle's hard line to the caliper while flexing with suspension and steering movement. It installs as a direct-fit replacement in the front left position on the 2006-2010 Hyundai Sonata — see the Buyer's Guide tab for engine-level details.
If a cracked, bulging, or leaking front-left hose is the cause of a soft or spongy pedal, uneven braking, or visible fluid seepage, this application-specific hose replaces it. Inspect the flexible lines when servicing the brakes and always bleed the system after installation.
Interchange: 15051070 · H620950 · 587310A000 · 587310A100 · BH143907 · BH144203
This part cross-references / interchanges with the following part numbers:
What vehicle does this brake hose fit?
It's a direct-fit replacement for the 2006-2010 Hyundai Sonata. Check the Buyer's Guide tab to confirm fitment for your specific vehicle.
Which position is this hose for?
This hose is for the front left position. Order the correct hose for any other corner you need to service.
What does a brake hydraulic hose do?
It carries pressurized brake fluid from the vehicle's hard line to the caliper while flexing with suspension and steering movement.
What are signs this hose may need replacing?
Cracking, bulging, or leaking on the flexible line, along with a soft or spongy pedal or visible fluid seepage. Diagnose the cause before replacing.
Is hardware included?
Any included hardware is coated to help prevent rust and corrosion. Bleed the brake system after installation to remove trapped air.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.