Beck/Arnley Brake Hydraulic Hose P/N:073-1647
Keep firm, responsive braking flowing to the wheel with the Beck/Arnley Brake Hydraulic Hose (P/N 073-2041), the rear right outer hose that carries pressurized brake fluid from the hard line to the caliper while flexing with suspension and steering movement. It's an application-specific, direct-fit replacement for the 2007-2013 Acura MDX, 2010-2013 Acura ZDX, and 2009-2015 Honda Pilot — see the Buyer's Guide tab for engine-level detail.
Over time brake hoses can crack, bulge, chafe, or leak, giving a soft or spongy pedal, a slow-pulling caliper, or visible fluid seepage. If a failed hose is the cause of those symptoms, this replaces it.
Position: rear right outer. Always bleed the brakes after installation.
Interchange: 01466STXA00 · H621156
This part cross-references / interchanges with the following part numbers:
What does this brake hydraulic hose do?
It carries pressurized brake fluid from the rigid line to the caliper while flexing with suspension and steering movement, keeping fluid pressure delivered to the wheel.
Which position is this hose?
This is the rear right outer brake hydraulic hose for the listed applications.
Which vehicles does P/N 073-2041 fit?
It's an application-specific replacement for the 2007-2013 Acura MDX, 2010-2013 Acura ZDX, and 2009-2015 Honda Pilot. See the Buyer's Guide tab for engine-level detail.
What are signs my brake hose may need replacing?
Cracking, bulging, chafing, or fluid seepage, along with a soft or spongy pedal. If a failed hose is the cause, this replaces it; diagnose the cause first.
What interchange numbers does this hose cross-reference?
It replaces 01466STXA00 and H621156.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.