Beck/Arnley 103-3018 rear outer CV joint boot kit for the 2003-2009 Nissan 350Z V6 3.5L and other vehicles seals the CV joint to hold its grease in and keep dirt and water out. It covers the outer CV joint on the rear axle shaft.
- Application specific, not universal
- Kit includes the boot, grease and clamps
- Grease contains an extreme pressure additive
Quick facts
- Part: Beck/Arnley 103-3018 CV joint boot kit
- Fits: 2003-2009 Nissan 350Z V6 3.5L and other vehicles
- Position: Rear outer
- Condition: New
A torn or cracked boot, grease thrown around the wheel area, or a clicking noise when turning can mean the boot has failed. Before you replace this kit, rule out a worn wheel bearing or a tire problem, since either one can also bring noise or vibration. Replace the rear outer boots on both sides together when you can; this listing is one kit.
Fits
This kit is listed for a wide range of Nissan and Infiniti models, led by the 2003-2009 Nissan 350Z V6 3.5L, the 2003-2008 Infiniti FX35 and the 2003-2008 Infiniti FX45, and each of them takes two. It matches OE form, fit and function. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: rear outer
- Quantity per vehicle: 2
Build and materials
- Kit contents: boot, grease, clamps
- Grease: extreme pressure additive
- Condition: new
In the box
One CV joint boot, grease and clamps.
Installation notes
- Not intended for installation tools that stretch the small end of the boot over the CV joint.
Interchange: 3924117V26 · 3924173L25 · 3924173L28 · 3924173L00 · DX339
This part cross-references / interchanges with the following part numbers:
3924117V26, 3924173L25, 3924173L28, 3924173L00, DX339
Frequently Asked Questions
Is the Beck/Arnley 103-3018 boot kit right for the 2003-2009 Nissan 350Z V6 3.5L?
Yes. Beck/Arnley 103-3018 is listed as a rear outer CV joint boot kit for the 2003-2009 Nissan 350Z V6 3.5L, which takes two.
What comes with this Beck/Arnley CV boot?
Beck/Arnley 103-3018 includes the boot, grease and clamps. The grease contains an extreme pressure additive.
Is this boot kit universal or made for specific cars?
It is application specific, not universal. This rear outer kit is made for the cars it is listed for.
What signs can show a rear outer CV boot has failed?
A torn or cracked boot, grease flung around the wheel area, or a clicking noise when turning can all point to a failed boot. A shop can inspect the joint if you are unsure.
Can I use a boot-stretching installation tool with this kit?
No. Beck/Arnley 103-3018 is not intended for installation tools that stretch the small end of the boot over the CV joint.
