Beck/Arnley 103-3048 front inner CV joint boot kit for the 2010-2012 Toyota RAV4 V6 3.5L wraps the CV joint to keep grease in and dirt out. The Beck/Arnley CV joint boot kit is made for this application, not as a universal boot.
- Boot, grease and clamps supplied together in one kit
- Grease with an extreme pressure additive
Quick facts
- Part: Beck/Arnley 103-3048 CV joint boot kit
- Fits: 2010-2012 Toyota RAV4 V6 3.5L
- Position: Front inner
- Condition: New
A split or cracked boot, grease thrown around the joint, or clicking on turns can mean the CV joint is wearing. Before you replace the boot kit, rule out other sources of the noise and check the joint itself, since a boot kit does not repair a worn joint. Plan to do the other side too; this listing is one kit.
Fits
It fits the 2010-2012 Toyota RAV4 V6 3.5L, which takes two, and matches OE form, fit and function.
Specifications
Fit and size
- Position: Front inner
- Quantity per vehicle: 2
Build and materials
- Kit contents: boot, grease and clamps
- Grease: extreme pressure additive
- Condition: New
In the box
One CV joint boot kit.
Installation notes
- Not intended for installation tools that stretch the small end of the boot over the CV joint.
Interchange: 044370R030 · W01331738714
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Beck/Arnley 103-3048 boot kit fit the 2010-2012 Toyota RAV4 V6 3.5L?
Yes. Beck/Arnley 103-3048 is a front inner CV joint boot kit for the 2010-2012 Toyota RAV4 V6 3.5L, and that vehicle takes two.
Does the Beck/Arnley CV boot kit come with grease and clamps?
Yes. The kit includes the boot, grease and clamps, and the grease contains an extreme pressure additive.
Is the 103-3048 boot kit for the front inner or outer joint?
It is for the front inner position. Beck/Arnley 103-3048 is listed as a front inner CV joint boot kit.
What does a failing front inner CV boot look like?
Look for splits or cracks in the rubber and grease flung around the joint. A clicking noise on turns can also mean the joint is wearing, so a shop can check it.
Can I use a stretching tool to fit this CV boot kit?
No. This kit is not intended for installation tools that stretch the small end of the boot over the CV joint.
