Beck/Arnley 085-6815A rear brake pad for the 2004-2008 Subaru Forester and other vehicles is an application-specific disc brake pad set that presses against the rear rotors to slow the car.
- Built as a direct replacement for OE applications, with attention to form, fit and function.
- Made with the same pad material type the vehicle originally came with, whether ceramic, semi-metallic or NAO.
- Precision cut edges give a proper fit.
- Bonded shims help reduce braking noise.
- The pads are post-cured, so no break-in is needed.
A squeal or grinding from the rear when you brake, or pads that look thin, can mean they're worn. A scored rotor or a sticking caliper can make similar noise. With the car parked and cool, look at the pad thickness and the rotor face through the wheel to find the cause first.
It fits the 2004-2008 Subaru Forester and the 2005-2006 Saab 9-2X, and it's a direct-fit set of brake pads for the 2004-2007 Subaru Impreza too.
Specifications
Fit and size
- Position: rear
- Package quantity: 1 set
Build and materials
- Pad material: same type as the vehicle's original (ceramic, semi-metallic or NAO)
- Edges: precision cut
- Shims: bonded
- Curing: post-cured
In the box: Rear pads are normally replaced on both sides at the same time, and this listing is one pad set with hardware.
Interchange / FMSI:
FMSI: D1004
Interchange: 17D1004CH · 141230592 · 10510040 · 171004 · MGD1004CH · 32006219 · 32006220 · 26696FE040 · 26696FE050 · ZD1004
Frequently Asked Questions
Are these Beck/Arnley 085-6815A rear brake pads a direct replacement for the 2004-2008 Subaru Forester?
Does the Beck/Arnley 085-6815A pad set come with hardware?
Yes. Beck/Arnley 085-6815A includes hardware along with the rear brake pads.
What friction material do these Beck/Arnley rear pads use?
These rear brake pads use the same pad material type the vehicle originally came with, whether that was ceramic, semi-metallic or NAO.
Which noises can mean these rear brake pads are worn out?
Squealing, a metal-on-metal grind or a lit brake warning light can mean the rear pads are worn and due for replacement.
Do these post-cured rear brake pads need a break-in after installation?
No. These rear brake pads are post-cured, which removes the need for a break-in.
This part cross-references / interchanges with the following part numbers:
17D1004CH, 141230592, 10510040, 171004, MGD1004CH, 32006219, 32006220, 26696FE040, 26696FE050, D1004, ZD1004
