Beck/Arnley 158-0606 coolant temperature sensor for the 1995-2001 Nissan Altima 4-cylinder 2.4L, the 2002-2018 Altima V6 3.5L, the 2002-2023 Altima 4-cylinder 2.5L, the 2019-2023 Altima 4-cylinder 2.0L and other vehicles reports how hot the coolant is to the ECU. The ECU uses that signal to manage the engine.
- Made to exacting tolerances so the ECU gets precise signals
- Corrosion resistant terminals and coatings
- Constructed to withstand an engine environment
Quick facts
- Part: Beck/Arnley 158-0606 coolant temperature sensor
- Also called: engine coolant temperature sensor
- Fits: 1995-2001 Nissan Altima 4-cylinder 2.4L, 2002-2018 Altima V6 3.5L, 2002-2023 Altima 4-cylinder 2.5L, 2019-2023 Altima 4-cylinder 2.0L and other vehicles
- Condition: New
An erratic temperature gauge, hard starting or poor fuel economy can mean the sensor is failing. Before you replace it, rule out a coolant leak, damaged wiring or connector, and a thermostat that sticks open, since any of these can disturb the same readings.
Fits
Its form, fit and function match the OE part, and it is application specific. It also fits the 2008-2021 Nissan Rogue 4-cylinder 2.5L and the 2013-2019 Nissan Sentra 4-cylinder 1.8L, among many other vehicles. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
- Quantity per vehicle: 1
- Terminals and coatings: corrosion resistant
- Condition: New
In the box
One coolant temperature sensor; each vehicle takes one.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this the right coolant temperature sensor for a 2019-2023 Nissan Altima 4-cylinder 2.0L?
Yes. Beck/Arnley 158-0606 is listed for the 2019-2023 Altima 4-cylinder 2.0L, and that engine takes one sensor. For another year or engine, open the "Vehicles it fits" section.
Will this coolant temperature sensor fit a 2013-2019 Nissan Sentra 4-cylinder 1.8L?
Yes. Beck/Arnley 158-0606 is listed for the 2013-2019 Sentra 4-cylinder 1.8L, and that engine takes one sensor.
Are the terminals on this coolant temperature sensor corrosion resistant?
Yes. The terminals and coatings on this sensor are corrosion resistant.
How can I tell if an engine coolant temperature sensor is going bad?
A check engine light, rough idle or a cooling fan that runs more than usual can be signs of a faulty sensor. A shop can test the sensor and its circuit to confirm.
Is the Beck/Arnley 158-0606 coolant temperature sensor made to tight tolerances?
Yes. This sensor is made to exacting tolerances for precise messaging to the ECU, and it is constructed to withstand an engine environment.
