Beck/Arnley 180-0552 crankshaft position sensor for the 2006-2015 Hyundai Sonata 4-cylinder 2.4L, the 2011-2014 Sonata 4-cylinder 2.0L and other vehicles tracks the position and speed of the crankshaft and sends that signal to the engine computer. The computer relies on it for ignition and fuel timing.
- Corrosion-resistant terminals and coatings
- Construction made for durability
- Designed for underhood conditions
- Application-specific design
Quick facts
- Part: Beck/Arnley 180-0552 crankshaft position sensor
- Also called: crank sensor
- Fits: the 2006-2015 Hyundai Sonata 4-cylinder 2.4L, the 2011-2014 Sonata 4-cylinder 2.0L and other vehicles
- Condition: New
A worn sensor can show up as hard starting, stalling or a check engine light. Those signs alone do not prove the sensor is at fault, since damaged wiring at its connector is another common source.
Fits
Listed for a wide range of Hyundai and Kia models, this is also a crankshaft position sensor for the 2011-2015 Kia Sorento 4-cylinder 2.4L and for the 2010-2015 Hyundai Tucson 4-cylinder 2.4L and the 2011-2013 Tucson 4-cylinder 2.0L, and each car takes one. Its form, fit and function match OE, including the strength of the magnet. If your car is not named here, look it up in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1
- Terminals and coatings: corrosion resistant
- Condition: New
Interchange: 0410005 · 0410043 · CSS1710 · 3918025300 · PC846 · 5S7676
This part cross-references / interchanges with the following part numbers:
0410005, 0410043, CSS1710, 3918025300, PC846, 5S7676
Frequently Asked Questions
Is this crank sensor right for a 2006-2015 Hyundai Sonata 4-cylinder 2.4L?
Yes. Beck/Arnley 180-0552 is listed for the 2006-2015 Hyundai Sonata 4-cylinder 2.4L and the 2011-2014 Sonata 4-cylinder 2.0L, and each takes one sensor.
Is this a Hyundai Tucson crankshaft position sensor for the 2011-2013 Tucson 4-cylinder 2.0L?
Yes. Beck/Arnley 180-0552 is listed for the 2011-2013 Hyundai Tucson 4-cylinder 2.0L and for the 2010-2015 Tucson 4-cylinder 2.4L.
Are the terminals on this crankshaft position sensor corrosion resistant?
Yes. The terminals and coatings are corrosion resistant, and the sensor is designed for underhood conditions.
Can a failing crankshaft position sensor cause stalling or a no-start?
It can, because the engine computer relies on this sensor's signal for ignition and fuel timing. A shop can test the signal if you want to confirm it.
Is PC846 the same crankshaft position sensor as Beck/Arnley 180-0552?
Yes. PC846 is one of the numbers listed as an interchange for Beck/Arnley 180-0552, and it is printed on the Interchange line with the others.
