Beck/Arnley 180-0611 crankshaft position sensor for the 2001-2009 Subaru Outback H6 3.0L, the 2010-2019 Outback H6 3.6L, the 2015-2017 Outback H4 2.5L and other vehicles reads crankshaft position and sends the signal to the engine computer. The computer uses that signal for fuel and ignition timing.
- Corrosion-resistant terminals and coatings
- Designed for underhood conditions
- Application-specific design
Quick facts
- Part: Beck/Arnley 180-0611 crankshaft position sensor
- Also called: crank sensor
- Fits: the 2001-2009 Subaru Outback H6 3.0L, the 2010-2019 Outback H6 3.6L, the 2015-2017 Outback H4 2.5L and other vehicles
- Condition: New
A failing sensor can mean hard starting, stalling or a check engine light. Before you replace it, rule out wiring or connector damage, which can bring on a no-start by itself.
Fits
It is listed for a wide range of Subaru models, including the 2008-2009 Subaru Legacy H6 3.0L, the 2010-2019 Legacy H6 3.6L, the 2015-2017 Legacy H4 2.5L and the 2008-2014 Subaru Tribeca. The sensor matches OE form, fit and function, including magnet strength. This listing is one sensor, and the 2010-2019 Outback H6 3.6L takes one. Driving something else? Run your year and engine through the "Vehicles it fits" section.
Specifications
Fit and size
- Quantity per vehicle: 1
- Sold as: one sensor per listing
Build and materials
- Condition: New
- Terminals and coatings: corrosion resistant
Interchange: 2132028 · CSS917 · PC297 · 22053AA070 · SU5560
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
2132028, CSS917, PC297, 22053AA070, SU5560
Frequently Asked Questions
Is this the Subaru Outback crankshaft position sensor for a 2010-2019 Outback H6 3.6L?
Yes. Beck/Arnley 180-0611 is listed for the 2010-2019 Subaru Outback H6 3.6L, so it matches that engine.
Is there a Subaru Legacy crankshaft position sensor for the 2015-2017 Legacy H4 2.5L?
Yes. This sensor is listed for the 2015-2017 Subaru Legacy H4 2.5L, and the vehicle takes one.
Does the Beck/Arnley crankshaft position sensor have corrosion protection?
Yes. The terminals and coatings on this Beck/Arnley 180-0611 sensor are corrosion resistant, and the sensor is designed for underhood conditions.
How can I tell if my crank sensor is going bad?
Hard starting, stalling and a check engine light can all be signs, though each can have other causes. A shop can test the sensor's signal, since that check needs the engine running.
Is 22053AA070 the same as this crankshaft position sensor?
Yes. 22053AA070 is one of the numbers that Beck/Arnley 180-0611 replaces, and the rest are on the Interchange line.
