Beck/Arnley 180-0730 crankshaft position sensor for the 2013-2017 Honda Accord 4-cylinder 2.4L, the 2014-2015 Accord 4-cylinder 2.0L and other vehicles reports crankshaft position to the engine computer. This Beck/Arnley crankshaft position sensor gives the computer the signal it uses to time spark and fuel delivery.
- Corrosion-resistant terminals and coatings
- Designed for underhood conditions
- Application-specific design
Quick facts
- Part: Beck/Arnley 180-0730 crankshaft position sensor
- Also called: crank sensor
- Fits: the 2013-2017 Honda Accord 4-cylinder 2.4L, the 2014-2015 Accord 4-cylinder 2.0L and other vehicles
- Condition: New
Hard starting, stalling or a check engine light can mean a crank sensor is failing. These signs alone do not prove the sensor is the problem, since a weak battery can also make an engine hard to start.
Fits
The same crankshaft position sensor fits the 2012-2015 Honda Civic 4-cylinder 1.8L and the 2015-2019 Honda CR-V 4-cylinder 2.4L, and each engine takes a single sensor. It is a direct-fit replacement that matches OE form, fit and function, including the strength of the magnet. Driving something else? Look up your year and engine in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1
- Condition: New
- Terminals and coatings: corrosion resistant
Interchange: 37500R60U01 · PC959 · 5S12696
This part cross-references / interchanges with the following part numbers:
37500R60U01, PC959, 5S12696
Frequently Asked Questions
Is this ckp sensor right for the 2013-2017 Honda Accord 4-cylinder 2.4L?
Yes. Beck/Arnley 180-0730 fits the 2013-2017 Honda Accord 4-cylinder 2.4L and the 2014-2015 Accord 4-cylinder 2.0L, and each engine takes one sensor.
Does the Beck/Arnley 180-0730 fit a 2015-2019 Honda CR-V 4-cylinder 2.4L?
Yes. This crankshaft position sensor fits the 2015-2019 Honda CR-V 4-cylinder 2.4L, which takes one. For any other car, look up its year and engine in the "Vehicles it fits" section.
Are the terminals on this Beck/Arnley sensor corrosion resistant?
Yes. The terminals and coatings are corrosion resistant, and the sensor is designed for underhood conditions.
What symptoms can a failing Beck/Arnley 180-0730 sensor cause?
Hard starting, stalling or a check engine light can all be signs. A shop can read the stored codes and test the sensor.
Is PC959 the same sensor as Beck/Arnley 180-0730?
Yes. PC959 is listed as an interchange number for this crankshaft position sensor, along with 37500R60U01 and 5S12696.
