Beck/Arnley 180-0789 crankshaft position sensor for the 2018-2026 Honda Accord 4-cylinder 1.5L, the 2023-2026 Accord 4-cylinder 2.0L and other vehicles reads the crankshaft's position and speed. Also called a crank sensor, it sends the signal the engine computer uses for ignition and fuel timing.
- Corrosion-resistant terminals and coatings
- Designed for underhood conditions
- Application-specific design
Quick facts
- Part: Beck/Arnley 180-0789 crankshaft position sensor
- Also called: crank sensor
- Fits: 2018-2026 Honda Accord 4-cylinder 1.5L, the 2023-2026 Accord 4-cylinder 2.0L and other vehicles
A hard start, a stall or a check engine light can be signs of a failing crankshaft position sensor. These signs alone do not prove the sensor is at fault; a weak battery is one other common cause of a hard start.
Fits
This sensor is listed for a wide range of Honda and Acura models, including a crankshaft position sensor for the 2017-2026 Honda CR-V 4-cylinder 1.5L and the 2023-2026 CR-V 4-cylinder 2.0L. Form, fit, function and magnet strength match OE. Open the "Vehicles it fits" section and check your exact model and engine.
Specifications
- Quantity per vehicle: 1
- Sold as: 1 sensor per listing
In the box
One crankshaft position sensor. The vehicle takes one.
Interchange: CP831 · 3750059BJ01 · PC1051 · 5S15171
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
CP831, 3750059BJ01, PC1051, 5S15171
Frequently Asked Questions
Is this ckp sensor right for the 2018-2026 Honda Accord 4-cylinder 1.5L?
Yes. Beck/Arnley 180-0789 is listed for the 2018-2026 Honda Accord 4-cylinder 1.5L and the 2023-2026 Accord 4-cylinder 2.0L, and each takes one sensor.
Is Beck/Arnley 180-0789 a crankshaft position sensor for the 2016-2026 Honda Civic 4-cylinder 1.5L?
Yes. Beck/Arnley 180-0789 is listed for the 2016-2026 Honda Civic 4-cylinder 1.5L and the 2025-2026 Civic 4-cylinder 2.0L.
Are the terminals on this Beck/Arnley crankshaft position sensor corrosion resistant?
Yes. The terminals and coatings are corrosion resistant, and the sensor is designed for underhood conditions.
What can a failing Beck/Arnley 180-0789 sensor do while driving?
A hard start, stalling or a check engine light can be signs of a failing sensor. A shop can test its signal with the right equipment.
Does CP831 cross to this Beck/Arnley crankshaft position sensor?
Yes. CP831 is an interchange number for Beck/Arnley 180-0789, as are 3750059BJ01, PC1051 and 5S15171.
