Beck/Arnley Engine Water Pump P/N:131-2292
Beck/Arnley 131-2311 water pump for the 2012 Ford Explorer 4-cylinder 2.0L and other vehicles drives coolant through the engine's cooling system. Also called an engine water pump, it is a new part.
Coolant leaking near the pump, a whine or grinding from its bearing, or an engine that runs hot can mean the water pump is wearing out. A stuck thermostat, a collapsed radiator hose, a weak radiator cap or a low coolant level can run the engine hot too, so find the cause before you buy a new pump.
The pump matches OE form, fit and function. It is a water pump for the 2006-2009 Ford Fusion 4-cylinder 2.3L and the 2010-2012 Fusion 4-cylinder 2.5L, and the vehicles it fits also include the 2005-2008 Ford Escape 4-cylinder 2.3L and the 2009-2012 Escape 4-cylinder 2.5L. The 2012 Ford Explorer 4-cylinder 2.0L takes one. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
One water pump with the gaskets and seals needed for installation.
Interchange: 252480 · WP9043 · 1521309 · 8521309 · NP1785 · 1256000 · 41120 · 1F2015010 · 1F7015010 · 1F7015100 · 1F7015100A · L32715100 · L3G215100 · L3G215100A · LF00115100 · LF0115100 · LF5215100A · WP4032
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this water pump right for a 2012 Ford Explorer 4-cylinder 2.0L?
Yes. Beck/Arnley 131-2311 is listed for the 2012 Ford Explorer 4-cylinder 2.0L, so it works as a Ford Explorer water pump for that engine.
Will this Beck/Arnley water pump fit a 2009-2012 Ford Escape 4-cylinder 2.5L?
Yes. Beck/Arnley 131-2311 is listed for the 2009-2012 Ford Escape 4-cylinder 2.5L, and also for the 2005-2008 Escape 4-cylinder 2.3L.
Does the 131-2311 water pump come with gaskets and seals?
Yes. The Beck/Arnley 131-2311 pump comes with the gaskets and seals needed for installation.
Are the bearings in this water pump sealed?
Yes. The bearings in this water pump are heavy duty, sealed and lubed for life.
What coolant should I use after replacing this water pump?
Use the proper coolant for your application to help maximize cooling system life. The Beck/Arnley catalog lists the coolant for each application.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.